Sony Home Theater System CMT SX2D User Manual

2-674-627-11(3)  
Micro Hi-Fi  
Component  
System  
Operating Instructions  
Owner’s Record  
The model and serial numbers are located on the rear of the unit. Record the serial number  
in the space provided below. Refer to them whenever you call upon your Sony dealer  
regarding this product.  
Model No. ______________  
Serial No. ______________  
CMT-DX2D  
CMT-SX2D  
©2006 Sony Corporation  
 
NOTICE FOR THE CUSTOMERS IN CANADA  
CAUTION  
The use of optical instruments with this product will  
increase eye hazard.  
Disposal of Old Electrical &  
Electronic Equipment  
(Applicable in the European  
Union and other European  
countries with separate  
collection systems)  
This symbol on the product or on its packaging  
indicates that this product shall not be treated as  
household waste. Instead it shall be handed over to the  
applicable collection point for the recycling of  
electrical and electronic equipment. By ensuring this  
product is disposed of correctly, you will help prevent  
potential negative consequences for the environment  
and human health, which could otherwise be caused by  
inappropriate waste handling of this product. The  
recycling of materials will help to conserve natural  
resources. For more detailed information about  
recycling of this product, please contact your local  
Civic Office, your household waste disposal service or  
the shop where you purchased the product.  
3GB  
 
Table of Contents  
Recording your favorite CD tracks on a  
Playing VIDEO CDs with PBC functions  
(CMT-SX2D Asian and Oceanian  
Playing repeatedly.................................18  
— Repeat Play  
Using the on-screen display to  
Adjusting the image and audio  
Adjusting the brightness of the  
Viewing information about the disc in the  
Viewing information about the disc in the  
4GB  
 
How to use this manual  
Playable discs  
You can play back the following discs on this  
system. Other discs cannot be played back.  
• This manual mainly explains operations using  
the remote, but the same operations can also  
be performed using the buttons on the unit  
having the same or similar names.  
• The OSD (on-screen display) may vary  
depending on the country model.  
List of playable discs  
Format of discs Disc logo  
DVD VIDEOs  
• The English OSD screen (on-screen display)  
is used for illustration purposes only.  
• “DVD” may be used as a general term for  
DVD VIDEOs, DVD+RWs/DVD+Rs and  
DVD-RWs/DVD-Rs.  
DVD-RWs/  
DVD-Rs  
• The following symbols are used in this  
manual.  
Symbol  
Meaning  
DVD+RWs/  
DVD+Rs  
Functions available for DVD  
VIDEOs, DVD-Rs/DVD-RWs in  
video mode, and DVD+Rs/  
DVD+RWs  
Functions available for VIDEO  
CDs (including Super VCDs or  
CD-Rs/CD-RWs in video CD  
format or Super VCD format)  
VIDEO CDs  
Audio CDs  
Functions available for music  
CDs or CD-Rs/CD-RWs in music  
CD format  
CD-Rs/CD-RWs  
Functions available for DATA  
CDs (CD-ROMs/CD-Rs/CD-  
RWs containing MP3* audio  
tracks and JPEG image files)  
*MP3 (MPEG1 Audio Layer 3) is a standard format  
defined by ISO/MPEG which compresses audio  
data.  
“DVD VIDEO,” “DVD-R” and “DVD-RW” logos are  
trademarks.  
6GB  
 
     
Region code of DVDs you can  
play on this system  
Notes about CD-R/CD-RW/  
DVD-R/DVD-RW (Video mode)/  
DVD+R/DVD+RW  
Your system has a region code printed on the  
back of the unit and will only play DVDs labeled  
with identical region code.  
• In some cases, CD-Rs, CD-RWs, DVD-Rs,  
DVD-RWs (Video mode) (DVD-RWs  
created in video mode have the same format  
as a DVD VIDEO), DVD+R or DVD+RW  
cannot be played on this system depending  
upon the recording quality or physical  
condition of the disc, or the characteristics of  
the recording device. Furthermore, the disc  
will not play if it has not been correctly  
finalized. For more information, see the  
operating instructions for the recording  
device. Note that some playback functions  
may not work with some DVD+RWs/  
DVD+Rs, even if they have been correctly  
finalized.  
ALL  
DVDs labeled  
system.  
will also be played on this  
If you try to play any other DVD, the message  
“Playback Prohibited by Area Limitations.” will  
appear on the TV screen. Depending on the  
DVD, no region code indication may be labeled  
even though playing the DVD is prohibited by  
area restrictions.  
Discs that this system cannot  
play  
• CD-ROMs (except for extension “.MP3”,  
“.JPG” or “.JPEG”)  
• CD-Rs/CD-RWs other than those recorded in  
the following formats:  
• A disc recorded in packet write format cannot  
be played.  
– music CD format  
– video CD format  
Note on playback operations  
of DVDs and VIDEO CDs  
– MP3 (MPEG1 Audio Layer-3)/JPEG  
format that conforms to ISO9660* Level 1/  
Level 2 or Joliet  
• CD-ROMs recorded in PHOTO CD format.  
• Data part of CD-Extras  
• Super Audio CDs  
• DVD-ROMs  
• DVD-RAMs  
• DVD Audio discs  
Some playback operations of DVDs and VIDEO  
CDs may be intentionally set by software  
producers. Since this system plays DVDs and  
VIDEO CDs according to the disc contents the  
software producers designed, some playback  
features may not be available. Also, refer to the  
instructions supplied with the DVDs or VIDEO  
CDs.  
• A DVD with a different region code.  
• DVD+R DL (Double layer) discs  
• DVD-RWs recorded in VR (Video  
Recording) mode  
Music discs encoded with  
copyright protection  
technologies  
• Photo-movies created after shooting on a  
DVD camcorder in VR (Video Recording  
format) mode  
This product is designed to playback discs that  
conform to the Compact Disc (CD) standard.  
Recently, various music discs encoded with  
copyright protection technologies are marketed  
by some record companies. Please be aware that  
among those discs, there are some that do not  
conform to the CD standard and may not be  
playable by this product.  
• Discs with non-standard shapes (e.g., heart,  
square, star) cannot be played on this unit.  
Attempting to do so may damage the unit. Do  
not use such discs.  
• A disc with paper or stickers on it.  
• A disc that has the adhesive, cellophane tape,  
or a sticker still left on it.  
* A logical format of files and folders on a CD-ROMs,  
defined by ISO (International Organization for  
standardization).  
continued  
7GB  
 
Note on DualDiscs  
A DualDisc is a two sided disc product which  
mates DVD recorded material on one side with  
digital audio material on the other side.  
However, since the audio material side does not  
conform to the Compact Disc (CD) standard,  
playback on this product is not guaranteed.  
Cautions when playing a disc  
that is recorded in Multi  
Session  
• When playing a disc which contains audio  
tracks in music CD format, MP3 audio tracks  
and JPEG image files, only the audio tracks in  
music CD format can be played back.  
• CD-R and CD-RW discs recorded in multi-  
session that have not ended by “closing the  
session” are not supported.  
Copyrights  
This product incorporates copyright protection  
technology that is protected by U.S. patents and  
other intellectual property rights. Use of this  
copyright protection technology must be  
authorized by Macrovision, and is intended for  
home and other limited viewing uses only unless  
otherwise authorized by Macrovision. Reverse  
engineering or disassembly is prohibited.  
This system incorporates Dolby1) Digital and DTS2)  
Digital Surround System.  
1)  
Manufactured under license from Dolby  
Laboratories. “Dolby” and the double-D symbol are  
trademarks of Dolby Laboratories.  
2)  
Manufactured under license from Digital Theater  
Systems, Inc. “DTS” and “DTS 2.0 + Digital Out”  
are trademarks of Digital Theater Systems, Inc.  
8GB  
 
Getting Started  
Hooking up the system  
Perform the following procedures 1 to 6 to hook up your system using the supplied cords and  
accessories. The terminals on the rear side vary depending on the country model. Be sure to check the  
connection procedure.  
European and Russian models  
AM loop antenna  
FM antenna  
Front speaker (Right)  
Other models  
Front speaker (Left)  
AM loop antenna  
FM antenna  
Front speaker (Right)  
Front speaker (Left)  
continued  
9GB  
 
   
Plug type C  
1 Connect the speakers.  
Insert only the  
stripped portion*  
Connect the right and left speaker cords to  
the SPEAKER jacks as shown below.  
AM loop antenna  
Insert only the stripped portion  
Gray/Solid (3)  
Black/Stripe (#)  
Extend the FM lead  
antenna horizontally  
North American model:  
Connect white side.  
2 Connect the FM and AM antennas.  
Other models:  
Connect brown side.  
Set up the AM loop antenna, then connect  
it.  
* Strip off an end-portion of wire covering.  
Note  
Keep the antennas away from the speaker cords.  
3 Connect a TV.  
Plug type A  
Select one of the following connections.  
Insert only the  
stripped portion*  
AM loop antenna  
Connection A (For all models)  
If your TV has component video input  
jacks, connect your TV to the  
COMPONENT VIDEO OUT jacks with a  
component video cord (not supplied).  
For European and Russian models,  
make sure to set the VIDEO OUT  
SELECTOR to COMPONENT.  
If your TV is compatible with progressive  
format file signals, use this connection and  
set “PROGRESSIVE.” For details, see “To  
Extend the FM lead antenna horizontally  
* Strip off an end-portion of wire covering.  
Plug type B  
Insert only the  
stripped portion*  
VIDEO OUT SELECTOR*  
AM loop antenna  
* European and Russian models only  
Extend the FM lead antenna horizontally  
* Strip off an end-portion of wire covering.  
10GB  
 
     
Connection B (For European and  
When connecting a video deck  
Connect the TV and the video deck using video and  
audio cords (not supplied) as shown below.  
Russian models)  
Connect the t INPUT jack of your TV  
to the T LINE-TV jack with the SCART  
cord (not supplied). Make sure to set  
the VIDEO OUT SELECTOR to EURO  
AV.  
TV  
When you connect using the SCART cord,  
check that the TV conforms to RGB signals.  
If the TV conforms to RGB signals, change  
the input mode of the TV to RGB signals.  
Refer to the operating instructions supplied  
with the TV to be connected.  
Video deck  
System  
Do not connect  
directly.  
If you connect a video deck between this system and the  
TV, you may experience video leakage when watching  
the video signal from this system. Do not connect a  
video deck between this system and the TV.  
Note  
Do not place the TV on this system.  
4 For models with a voltage selector, set  
the VOLTAGE SELECTOR to the local  
power line voltage.  
Depending on the model, the VOLTAGE  
SELECTOR may differ.  
Note  
Only the video signal will be output through the  
SCART cord.  
Connection C (Except for European  
and Russian models)  
Connect the video input jack of your TV  
to the VIDEO OUT jack with the video  
cable (supplied)*.  
5 Connect the power cord to a wall  
outlet.  
If the supplied adapter on the plug does not  
fit your wall outlet, detach it from the plug  
(only for models equipped with an adapter).  
To turn on the system, press ?/1.  
Note  
Install this system so that the power cord can be  
unplugged from the wall socket immediately in the  
event of trouble.  
* except for European and Russian models  
When using a TV  
Turn on the TV and select the video input so that you  
can view the pictures from this system.  
continued  
11GB  
 
 
6 (Asian and Oceanian models only)  
Set the color system to PAL or NTSC  
depending on the color system of your  
TV.  
Inserting two R6 (size AA)  
batteries into the remote  
The color system is factory set to NTSC for  
region code 3 models, and PAL for other  
region code models. Each time you perform  
the procedure below, the color system  
changes as follows:  
e
E
E
e
NTSC y PAL  
1 Press DVD (or FUNCTION + or –  
repeatedly) to switch the function to  
DVD.  
Playback starts automatically if a disc  
with auto playback function is loaded.  
Press x to stop playback.  
Note  
If you do not use the remote for a long period of time,  
remove the batteries to avoid possible damage from  
battery leakage and corrosion.  
2 Press ?/1 to turn off the system.  
Tip  
3 Press ?/1 on the unit while holding  
With normal use, the batteries should last for about six  
months. When the remote no longer operates the  
system, replace both batteries with new ones.  
down x on the unit.  
The system turns on and the color  
system is changed.  
Notes  
Attaching the speaker pads  
• A disturbance in the TV screen may be present for a  
moment after changing the color system as described  
above.  
Attach the supplied speaker pads to the bottom  
of the speakers to stabilize the speakers and  
prevent them from slipping.  
• When you play back a VIDEO CD recorded in a  
different color system from the one you set to the  
unit, the picture image may be distorted.  
• To set the VCD color system, see page 23.  
To connect optional components  
12GB  
 
   
Setting the clock  
Selecting a language  
Use buttons on the remote for the operation.  
You can change the on-screen display language.  
1
2
3
Press ?/1 to turn on the system.  
1
Turn on your TV and select the video  
input.  
Press CLOCK/TIMER SET.  
2
3
Press ?/1 to turn on the system.  
Press . or > repeatedly to set the  
hour.  
Press DVD (or FUNCTION + or –  
repeatedly) to switch the function to  
DVD.  
4
5
Press ENTER.  
Press . or > repeatedly to set the  
minute.  
Playback starts automatically if a disc with  
auto playback function is loaded. Press xto  
stop playback.  
6
Press ENTER.  
The clock starts working.  
4
5
Press  
DISPLAY in stop mode.  
Press < or , repeatedly to select  
“Language,” then press ENTER.  
To adjust the clock  
1 Press CLOCK/TIMER SET.  
2 Press . or > to select “CLOCK SET,”  
6
7
Press M or m repeatedly to select  
“OSD,” then press ENTER.  
then press ENTER.  
Press M or m repeatedly to select a  
language from the displayed list, then  
press ENTER.  
3 Do the same procedures as step 3 to 6  
above.  
Notes  
8
Press  
DISPLAY to turn off the Setup  
• The clock settings are canceled when you disconnect  
the power cord or if a power failure occurs.  
• You cannot set the clock in Power Saving Mode  
Display.  
13GB  
 
                 
Playing a disc  
— Normal Play/Shuffle Play  
Disc – Play  
Loading a disc  
Use buttons on the unit for the operation.  
Before playing a DVD, VIDEO CD or JPEG  
turn on your TV and select the video input.  
Depending on the DVD or VIDEO CD, some  
operations may be different or restricted. Refer  
to the operating instructions supplied with the  
disc.  
1
2
Press Z.  
Place a disc with the label side up on  
the disc tray.  
Example: When playing a DVD  
Chapter number  
When you play an 8 cm Disc, place it  
on the inner circle of the tray.  
Title number  
Playing time  
3
Press Z again to close the disc tray.  
Example: When playing a CD  
Notes  
• Do not use a disc with tape, seals or paste on it as this  
may cause malfunction.  
• Do not forcibly press the disc tray closed with your  
finger, as this may cause malfunction.  
Track number  
Playing time  
1
2
Press DVD (or FUNCTION + or –  
repeatedly) to switch the function to  
DVD.  
Playback starts automatically if a disc with  
auto playback function is loaded.  
Press H (or DVD NX on the unit).  
Playback starts.  
14GB  
 
               
Notes  
Other operations  
• Depending on the DVD or VIDEO CD, some  
operations may be restricted.  
To  
Do this  
Stop play  
Pause  
Press x.  
• Maximum number of albums on a disc: 100 (The  
maximum number of MP3 audio tracks or JPEG  
image files that can be contained on a disc is 999.)  
However, when a large number of non-MP3/JPEG  
files are present, the maximum number of albums,  
tracks and files may decrease.  
Press X (or DVD NX on the  
unit).1)  
Press X again to go to the next frame  
(DVD/VIDEO CD only).  
Press H (or DVD NX on the unit)  
to resume play.  
• For data CD, playback is possible up to 16 levels.  
• The system supports MP3 audio tracks recorded with  
a bit rate of 32 to 320 kbps and a sampling frequency  
of 32/44.1/48 kHz for MPEG1 Audio Layer-3.  
• An album that does not include an MP3 audio track  
or JPEG image file is skipped.  
Select a track, Press . or > repeatedly during  
image or  
chapter  
play or pause.  
Press . once during play or pause  
to go back to the beginning of the  
current track (except for MP3).  
• If you put the extension “.MP3” to data not in MP3  
format, the system cannot recognize the data  
properly and will generate a loud noise which could  
damage your speaker system.  
Locate a point Press m or M during play.  
quickly in fast Each time you press the button,  
forward or fast searching speed changes.  
reverse (Scan) To return to Normal Play, press H  
• The following discs take a longer time to start  
playback.  
(Except for  
MP3/JPEG)2)  
(or DVD NX on the unit).  
– a disc recorded with complicated tree structure.  
– a disc recorded in Multi Session.  
Play all tracks Press PLAY MODE repeatedly in  
on the disc in stop mode until “SHUF” appears in  
random order the display, then press H (or DVD  
– a disc to which data can be added (non-finalized  
disc).  
(Shuffle  
Play)3)  
NX on the unit).  
• Some CD-Rs or CD-RWs cannot be played on this  
system depending on file format.  
Watch frame During play, press  
by frame SLOW y. Each time you press the  
(Slow-motion button, the playback speed changes.  
Play) To return to Normal Play, press H  
SLOW4) or  
Tip  
When playing the data disc contained MP3 audio  
tracks and JPEG image files, set “Data CD Priority”  
(DVD/VIDEO (or DVD NX on the unit).  
CD only)1)2)  
Resuming playback from the  
point you stopped the disc  
— Resume Play (DVD/VIDEO CD/CD only)  
Rotate the  
current image  
(JPEG only)  
Press < or ,.  
Each time you press ,, the image  
turns clockwise by 90º.  
Each time you press <, the image  
turns counterclockwise by 90º.  
This system memorizes the point where you  
stopped the disc so you can resume from that  
point.  
Switch to  
Press DVD NX on the unit  
DVD function (Automatic Source selection).  
from another  
source  
Playback starts automatically when a  
disc is loaded.  
1 While playing a disc, press x to stop  
playback.  
Cut the sound Press MUTING.  
Press MUTINGagainor VOLUME +  
“RESUME” appears in the display. If  
“RESUME” does not appear, Resume Play  
is not available.  
to restore sound.  
Remove a disc Press Z on the unit.  
2 Press H (or DVD NX on the unit).  
The player starts playback from the point  
you stopped the disc in step 1.  
1)  
There may be some disturbance in the video image.  
For DVDs and VIDEO CDs, no sound is output.  
2)  
3)  
You cannot perform Shuffle Play on DVDs and  
VIDEO CDs with PBC function.  
DVD only  
4)  
continued  
15GB  
 
                     
Notes  
• You cannot perform Resume Play during Shuffle  
Play or Program Play.  
Playing DVDs using the  
menu  
• This function may not work properly with some  
discs.  
• Depending on where you stop the disc, the system  
may not resume playback from exactly the same  
point.  
A DVD is divided into a lot of sections, which  
make up a picture or music feature. These  
sections are called “titles.” When you play a  
DVD which contains several titles, you can  
select the title you want using TOP MENU.  
When you play DVDs that allow you to select  
items such as the language for the subtitles and  
the language for the sound, select these items  
using MENU.  
• Resume play is canceled when:  
– you press x in stop mode.  
– you turn off the system.  
– you open the disc tray.  
– you change the play mode.  
– you change the function.  
Playing a track by entering the  
track number in Normal Play  
mode (on the remote only)  
1
Press TOP MENU or MENU.  
The disc’s menu appears on the TV screen.  
The contents of the menu vary from disc to  
disc.  
Press the number button(s) to enter the track  
number of the track you want to play.  
To enter a track number over 10  
1 Enter the corresponding digits.  
2 Press ENTER.  
2
3
Press M/m/</, or the number  
buttons to select the item you want to  
play or change.  
Example:  
To play track number 30, press 3 and 0, then press  
ENTER.  
Press ENTER.  
Selecting an album/track/file  
using the on-screen display (MP3/  
JPEG only)  
Press M/m/</, repeatedly to select a track or  
file, then press ENTER.  
The selected track or file starts playing.  
Notes  
• On the TV screen, up to 16 characters can be  
displayed for album names, and up to 11 characters  
for track/file names. When multiple album names  
use the same first 16 characters, the tracks and files  
in those albums are displayed together in a single  
folder.  
• Only the letters in the alphabet and numbers can be  
used for album or file names. Anything else is  
displayed as “-”.  
• If an MP3 audio track is played, indicated elapsed  
time may be different from the actual time.  
16GB  
 
       
To cancel playback with PBC  
functions  
Playing VIDEO CDs with  
PBC functions (Ver. 2.0)  
— PBC Play  
1 Press x twice to cancel Resume Play  
2 Press MENU repeatedly until “PBC Off”  
appears.  
3 Press H (or DVD NX on the unit).  
Playback starts from the selected track. Still  
images, such as the menu screens, will not  
be shown.  
To return to PBC playback, repeat steps 1  
through 3, selecting “PBC On” in step 2.  
You can use PBC* menus on your TV screen to  
enjoy the disc’s interactive software. The menu  
format and structure may differ depending on  
each disc.  
* PBC: Playback Control  
1
2
Press DVD (or FUNCTION + or –  
repeatedly) to switch the function to DVD.  
Press H (or DVD NX on the unit) to  
start playing a VIDEO CD with PBC  
functions (Ver. 2.0).  
The PBC menu appears on the TV screen.  
3
Press the number buttons to select the  
item number you want.  
4
5
Press ENTER.  
Continue playback according to the  
instructions on the menus to enjoy  
interactive playback.  
Refer to the operating instructions supplied  
with the disc, as the operating procedure  
may differ according to the VIDEO CD.  
To go back to a previous menu  
Press O RETURN.  
Note  
Depending on the VIDEO CD, “Press ENTER” in step  
4 may appear as “Press H” in the operating  
instructions supplied with the disc. In this case, press  
ENTER.  
17GB  
 
             
Using the on-screen display  
Playing repeatedly  
— Repeat Play  
Press REPEAT repeatedly during play.  
Each time you press the button, the setting  
changes cyclically as follows:  
• Off: does not play repeatedly.  
• Repeat All: repeats all the tracks/files on a  
disc.  
You can play all the tracks/files or a single track/  
file on a disc repeatedly.  
• Repeat Track: repeats the current track/file.  
Using the front panel display  
To cancel Repeat Play  
Press REPEAT during play until “REP” or  
“REP1” appears.  
Select “Off.”  
Notes  
REP: For all the tracks/files on the disc.  
REP1: For a single track/file only.  
• You cannot perform Repeat Play during PBC  
playback of VIDEO CDs (page 17).  
• Repeat Play is canceled when:  
– you turn off the system.  
To cancel Repeat Play  
Press REPEAT repeatedly until both “REP” and  
“REP1” disappear.  
– you open the disc tray.  
– you switch to other functions except DVD.  
– you search for a track/file.  
Notes  
• You cannot perform Repeat Play during PBC  
playback of VIDEO CDs (page 17).  
• When you select “REP1,” that track/file is repeated  
endlessly until “REP1” is canceled.  
18GB  
 
 
Other operations  
Creating your own  
program  
To  
Do this  
Cancel Program Play  
Press PLAY MODE  
repeatedly in stop mode  
until “Continue” appears.  
— Program Play  
Clear a programmed  
step  
Press M/m/</,  
repeatedly to select a step  
number, then press CLEAR  
in stop mode.  
You can make a program of up to 12 steps.  
You can synchro record the programmed tracks  
onto a cassette tape (page 32).  
The program operation can only be set using the  
TV screen.  
Clear all the  
programmed steps  
Press M/m/</,  
repeatedly to select “All  
Clear,” then press ENTER.  
Notes  
1
Press DVD (or FUNCTION + or –  
repeatedly) to switch the function to  
DVD.  
• You cannot perform Program Play with DVDs and  
VIDEO CDs with PBC function.  
• Program Play is canceled when:  
– you turn off the system.  
2
Press PLAY MODE repeatedly in stop  
mode until the Program Display  
appears on the TV screen.  
– you open the disc tray.  
– you switch to other functions except DVD.  
Tip  
Program Track  
The program you made remains after Program Play  
finishes. To play the same program again, press H (or  
DVD NX on the unit).  
1
2
3
4
5
6
7
8
9
10  
11  
12  
All Clear  
Play Program  
3
4
Press M/m/</, repeatedly to select  
the desired step number.  
Press the number buttons to select the  
track you want to program.  
If you make a mistake, press CLEAR to  
cancel the number, then select another  
number.  
Program Track  
1 3  
4
5
6
7
8
9
10  
11  
12  
2
3
All Clear  
Play Program  
5
6
To program other tracks, repeat steps 3  
and 4.  
Press M/m/</, repeatedly to select  
“Play Program,” then press H (or DVD  
NX on the unit).  
Program Play starts.  
19GB  
 
               
Searching for a particular  
point using the time code  
Using the on-screen  
display to search  
— Time Search  
1
Press SEARCH.  
The Search Display appears.  
You can search for a chapter (DVD) and track  
(VIDEO CD, CD). As chapters and tracks are  
assigned unique numbers on the disc, so you can  
select the desired one by entering its number. Or,  
you can search for a particular point using the  
time code (Time Search).  
2
3
Press M or m repeatedly to select  
“Time.”  
Press the number buttons to input the  
time code, then press ENTER.  
When playing a DVD, input the playing  
time of the current title.  
When playing a VIDEO CD/CD, input the  
playing time of the current track.  
For example, to find the scene at 2 hours,  
10 minutes, and 20 seconds after the  
beginning, enter “2:10:20”.  
Searching for a chapter  
1
Press SEARCH.  
The Search Display appears.  
2
3
Press M or m repeatedly to select  
“Chapter.”  
Note  
The time search function does not work on a VIDEO  
CD (when the PBC function is on).  
Press the number buttons to select the  
desired chapter number.  
If you make a mistake, press CLEAR to  
cancel the number, then select another  
number.  
To cancel searching  
Press SEARCH repeatedly until the display  
disappears.  
4
Press ENTER.  
Playback starts from the selected number.  
Searching for a track  
1
Press SEARCH.  
The Search Display appears.  
2
3
Press M or m repeatedly to select  
“Track.”  
Press the number buttons to select the  
desired track number.  
If you make a mistake, press CLEAR to  
cancel the number, then select another  
number.  
4
Press ENTER.  
Playback starts from the selected number.  
20GB  
 
         
• For VIDEO CDs and CDs, the setting returns to  
“Stereo” when you turn off the system or open the  
disc tray.  
Disc – Various functions  
• During DVD playback, the sound may change  
automatically.  
Changing the sound/  
subtitle/angle  
Displaying the audio  
information of the disc (DVD  
only)  
When you press AUDIO, the channels being  
played are displayed on the TV screen.  
For example, in Dolby Digital format, multiple  
signals ranging from monaural to 5.1 channel  
signals can be recorded on a DVD. Depending  
on the DVD, the number of recorded channels  
may differ.  
Changing the sound  
If a DVD is recorded with multilingual titles or  
audio formats, you can select the language or  
audio format you want while playing the DVD.  
You can also output either the left or right  
channel sound from both speakers while playing  
a VIDEO CD or CD. Note that this results in  
monaural sound.  
Current audio format  
Press AUDIO repeatedly during play.  
2/2 LPCM 2 Ch  
Each time you press the button, the setting  
changes cyclically as follows:  
x When playing a DVD  
Depending on the DVD, the choice of the  
language and audio format varies.  
When the same language is displayed twice or  
more times, the DVD is recorded in multiple  
audio formats.  
The display examples are as  
follows:  
Format  
Display  
x When playing a VIDEO CD/CD  
PCM (stereo)  
• Stereo: The standard stereo sound.  
• Left: The sound of the left channel  
(monaural).  
Dolby Digital 2 ch  
Dolby Digital 5.1 ch  
DTS  
• Right: The sound of the right channel  
(monaural).  
To preset the desired audio track  
You can preset the system to the desired audio  
track with the operations described under  
MPEG AUDIO  
Notes  
• When you play a DVD with the audio other than  
2 channels, the sound is composed into 2 channels  
and output from the system speakers. However,  
sound is not output in “Multi Channel PCM” format.  
• For discs not recorded in multiple audio format, you  
cannot change the sound.  
• Depending on the DVD, you may not be able to  
change the sound even if the DVD is recorded in  
multiple audio format.  
continued  
21GB  
 
         
Displaying the subtitles (DVD  
only)  
Changing the language  
— Language  
With DVDs on which multilingual subtitles are  
recorded, you can change the subtitle language  
while playing a DVD, or turn the subtitles on or  
off whenever you want.  
1
Press  
DISPLAY in stop mode.  
The Setup Display appears.  
Press SUBTITLE repeatedly during play.  
2
3
Press < or , repeatedly to select  
“Language,” then press ENTER.  
Each time you press the button, the language  
changes.  
Press M or m repeatedly to select an  
item, then press ENTER.  
To cancel the subtitle setting  
Press SUBTITLE repeatedly to select “Off.”  
x OSD (on-screen display)  
Note  
Switches the display language on the TV  
screen. Select the language from the  
displayed list.  
Depending on the DVD, you may not be able to change  
the subtitles even if multilingual subtitles are recorded  
on the DVD.  
x DVD Menu (DVD only)  
Select the language for the DVD menu.  
Changing the angles (DVD  
only)  
x Audio (DVD only)  
Switches the language of the sound track.  
Select the language from the displayed list.  
When playing a DVD on which various angles  
(multi-angles) for a scene are recorded, you can  
change the viewing angle.  
x Subtitle (DVD only)  
Switches the language of the subtitle. Select  
the language from the displayed list.  
If “Auto” is selected, the language specified  
as the disc’s default language is  
Press ANGLE repeatedly during play.  
Each time you press the button, the angle  
changes.  
Note  
automatically selected.  
Depending on the DVD, you may not be able to change  
the angles even if multi-angles are recorded on the  
DVD.  
4
5
Press M or m repeatedly to select a  
language, then press ENTER.  
Press  
DISPLAY to turn off the Setup  
Display.  
Note  
When the selected language is not recorded on the  
DVD, one of the recorded languages is automatically  
selected (except for “OSD”).  
Tip  
You can reset all the DVD settings except for Parental  
Control by performing the operations described under  
* Except for Parental Control settings  
22GB  
 
             
Note  
Depending on the DVD, “4:3 Letter Box” may be  
selected automatically instead of “4:3 Pan Scan” or  
vice versa.  
Adjusting the image and  
audio settings  
— AV  
x VCD Color Sys (Asian and Oceanian  
models only)  
Select the color system when you play a VIDEO  
CD. The default setting is underlined.  
1
Press  
DISPLAY in stop mode.  
Auto  
Outputs the video signal in the  
system of the disc, either PAL or  
NTSC. If your TV uses a dual  
system, select “Auto.”  
The Setup Display appears.  
2
3
4
5
Press < or , repeatedly to select  
“AV,” then press ENTER.  
NTSC  
PAL  
Changes the video signal of a PAL  
disc and outputs it in the NTSC  
system.  
Press M or m repeatedly to select an  
item, then press ENTER.  
Press M or m repeatedly to select a  
setting, then press ENTER.  
Changes the video signal of an  
NTSC disc and outputs it in the  
PAL system.  
Press  
Display.  
DISPLAY to turn off the Setup  
x Dolby Digital  
x TV Type  
Set the Dolby Digital settings to enjoy 5.1  
channel sound when an optional amplifier is  
Select the aspect ratio of the connected TV.  
The default setting varies, depending on the  
country model.  
4:3 Pan Scan Select this when you connect a 4:3  
screen TV. This setting displays the  
wide picture on the entire screen and  
cuts off the portions that do not fit.  
x DTS  
Set the DTS settings to enjoy 5.1 channel sound  
when an optional amplifier is connected (see  
4:3 Letter  
Box  
Select this when you connect a 4:3  
screen TV. This setting displays a wide  
picture with bands displayed on the  
upper and lower portions of the screen.  
x Data CD Priority (MP3, JPEG only)  
Set priority data you want to play, when you  
play the data disc (CD-ROM/CD-R/CD-RW)  
contained MP3 audio tracks and JPEG image  
files. When you change this setting, eject and  
reload the disc.  
16:9  
Select this when you connect a wide-  
screen TV or a TV with a wide mode  
function.  
• 4:3 Pan Scan  
• 4:3 Letter Box  
• 16:9  
The default setting is underlined.  
MP3  
If an MP3 file exists on the disc,  
the system recognizes the disc as  
an MP3 Disc. If only JPEG files  
exist on the disc, the system  
recognizes the disc as a JPEG  
Disc.  
JPEG  
If a JPEG file exists on the disc,  
the system recognizes the disc as a  
JPEG Disc. If only MP3 files exist  
on the disc, the system recognizes  
the disc as an MP3 Disc.  
continued  
23GB  
 
         
Note  
About DVD software types and  
the conversion method  
For Asian and Oceanian models, you can change the  
color system of this unit according to the connected TV  
DVD software can be divided into 2 types: film-  
based software and video-based software.  
Video-based software is derived from TV, such  
as dramas and sit-coms, and displays images at  
30 frames/60 fields per second. Film-based  
software is derived from film and displays  
images at 24 frames per second. Some DVD  
software contains both video and film.  
In order for these images to appear natural on  
your screen when output in progressive format,  
the progressive signals need to be converted to  
match the type of DVD software that you are  
watching.  
Tip  
You can reset all the DVD settings except for Parental  
Control by performing the operations described under  
* Except for Rating (Parental Control) settings  
To change the type of signal  
output from the system  
— PROGRESSIVE  
Progressive is the method for displaying TV  
images which reduces flickering, and sharpens  
the image. To display using this method, you  
need to connect to a TV that accepts progressive  
signals.  
Note  
When you play video-based software in progressive  
signal format, sections of some types of images may  
appear unnatural due to the conversion process when  
output through the COMPONENT VIDEO OUT jacks.  
Even though you set to “PROGRESSIVE,” images  
from the VIDEO OUT jack are unaffected as they are  
output in the interlace format.  
1 Press DVD (or FUNCTION + or –  
repeatedly) to switch the function to DVD.  
Playback starts automatically if a disc with  
auto playback function is loaded. Press x to  
stop playback.  
2 Press PROGRESSIVE on the unit.  
Each time you press PROGRESSIVE on the  
unit, the on-screen display changes as  
follows:  
PROGRESSIVE* y INTERLACE (default  
setting)  
* “PROGRESSIVE” appears in the front panel  
display when the system outputs progressive  
signals.  
x PROGRESSIVE  
Select this setting when your TV accepts  
progressive signals and the TV is connected to  
the COMPONENT VIDEO OUT jacks.  
Normally select this setting under the above  
condition.  
Note that the picture will not be clear or no  
picture will appear if you select these settings  
when either of the above conditions is not met.  
x INTERLACE (default setting)  
Select this setting when your TV does not accept  
progressive signals or your TV is connected to  
the T LINE-TV jack or VIDEO OUT jack.  
24GB  
 
     
6
Enter or re-enter your 4-digit password  
using the number buttons, then press  
ENTER.  
Restricting disc playback  
— Rating (Parental Control)  
The lock icon is closed and the Parental  
Control setting is completed.  
If you make a mistake entering your  
password, press CLEAR before you press  
ENTER and input the correct number.  
Limiting playback by children  
You can limit the playback of some DVDs  
according to a predetermined level such as the  
age of the users.  
When a limited scene is played back, that scene  
is cut or replaced with a preset other scene.  
Language  
AV  
Rating  
Reset  
Password  
Rating  
1 G  
1
Press  
DISPLAY in stop mode.  
The Setup Display appears.  
2
3
Press < or , repeatedly to select  
“Rating,” then press ENTER.  
To turn off the Parental Control  
function and play the DVD after  
entering your password  
Press m to select “Rating.”  
When a 4-digit password has already been  
registered, enter the 4-digit password using  
the number buttons, then press ENTER.  
You can then select “Rating.”  
Enter your 4-digit password using the number  
buttons, then press ENTER.  
The lock icon is opened and the Parental Control  
function is turned off.  
To change the password  
Language  
AV  
Rating  
Reset  
1 In step 6, enter your 4-digit password using  
Password  
Rating  
the number buttons, then press ENTER.  
8
2 Enter a new 4-digit password using the  
number buttons, then press ENTER.  
4
5
Press ENTER repeatedly to select the  
level you want.  
Each time you press the button, the level  
changes.  
The lower the value, the more strict the  
limitation.  
Press M to select “Password.”  
continued  
25GB  
 
         
Playing the disc for which  
Parental Control is set  
System setup item list  
When you press  
settings are displayed.  
The default settings are underlined.  
DISPLAY, the following  
1
Insert the disc and press DVD (or  
FUNCTION + or – repeatedly) to switch  
the function to DVD.  
The Rating Display appears.  
Language (page 22)  
OSD  
Select the language you want to  
use from the displayed language  
list.  
2
Enter your 4-digit password using the  
number buttons, then press ENTER.  
Playback starts.  
DVD Menu  
Audio  
Select the language you want to  
use from the displayed language  
list.  
Notes  
• When you play DVDs which do not have the Parental  
Control function, playback cannot be limited on this  
system.  
Select the language you want to  
use from the displayed language  
list.  
• Depending on the DVD, you may be asked to change  
the parental control level while playing the disc. In  
this case, enter your password, then change the level.  
If the Resume Play mode is canceled, the level  
returns to the original level.  
Subtitle  
Select the language you want to  
use from the displayed language  
list.  
Tip  
If you forgot your password, select “Password” and  
enter “199703” using the number buttons in the Rating  
Display, then press ENTER. You can then enter a new  
4-digit password.  
1)  
TV Type  
4:3 Pan Scan  
4:3 Letter Box  
16:9  
2)  
VCD Color Sys  
Auto  
NTSC  
PAL  
Dolby Digital  
DTS  
PCM  
Bit Stream  
PCM  
Bit Stream  
Data CD Priority  
MP3  
JPEG  
26GB  
 
   
Password  
Rating  
1 G  
2
3 PG  
4 PG 13  
5
6 R  
7 NC 17  
8
Reset  
YES  
NO  
1) The default setting varies, depending on the country  
model.  
2) Asian and Oceanian models only  
27GB  
 
4
5
Press PRESET + or – repeatedly to  
select the desired preset number.  
Tuner  
Press ENTER.  
“COMPLETE” appears.  
Presetting radio stations  
6
Repeat steps 1 through 5 to store other  
stations.  
You can preset up to 20 FM stations and 10 AM  
stations. You can then tune in any of those  
stations simply by selecting the corresponding  
preset number.  
Manual tuning preset  
You can manually tune in and store the radio  
frequency of the desired stations.  
Automatic tuning preset  
1
2
3
Press TUNER/BAND repeatedly to  
select “FM” or “AM.”  
You can automatically tune in all of the stations  
that can be received in your area and then store  
the radio frequency of the desired stations.  
Press TUNING + or – repeatedly to tune  
in the desired station.  
1
2
Press TUNER/BAND repeatedly to  
select “FM” or “AM.”  
Press TUNER MEMORY.  
A preset number flashes.  
Perform steps 4 and 5 while the preset  
number flashes.  
Press and hold TUNING + or – until the  
frequency indication starts to change,  
then release it.  
The frequency changes as the system scans  
for a station. Scanning stops automatically  
when a station is tuned in. At that time,  
“TUNED” and “STEREO” (for an FM  
stereo program) appear.  
4
5
Press PRESET + or – repeatedly to  
select the desired preset number.  
Press ENTER.  
“COMPLETE” appears.  
6
Repeat steps 1 through 5 to store other  
stations.  
Other operations  
To  
Do this  
Tune in a station  
Follow the procedure described  
with a weak signal in “Manual tuning preset.”  
If “TUNED” does not appear and the  
scanning does not stop  
Set another station Start over from step 1. After  
to the existing  
preset number  
step 3, press PRESET + or –  
repeatedly to select the preset  
number you want to store the  
other station.  
Set the frequency of the desired radio  
station as described in steps 2 through 6 of  
3
Press TUNER MEMORY.  
A preset number flashes.  
Perform steps 4 and 5 while the preset  
number flashes.  
Preset number  
28GB  
 
                 
To change the AM tuning interval  
(except for European and  
Russian models)  
Listening to the radio  
You can listen to a radio station either by  
selecting a preset station, or by manually tuning  
in the station.  
The AM tuning interval is factory-preset to  
9 kHz (or 10 kHz for some areas). To change the  
AM tuning interval, tune in any AM station first,  
then turn off the system. While holding x on the  
unit, press TUNER/BAND on the unit. When  
you change the interval, all the AM preset  
stations are erased. To reset the interval, repeat  
the same procedure.  
Listening to a preset station  
— Preset Tuning  
Preset radio stations in the tuner’s memory first  
Note  
You cannot change the AM tuning interval in Power  
Saving Mode (page 37).  
1
2
Press TUNER/BAND repeatedly to  
select “FM” or “AM.”  
Tip  
Press PRESET + or – repeatedly to  
select the desired preset station.  
To improve broadcast reception, adjust the supplied  
antennas, or connect a commercially available external  
antenna.  
Preset number  
Frequency  
continued  
29GB  
 
             
Listening to non-preset radio  
station  
Using the Radio Data  
System (RDS)  
— Manual Tuning  
(European model only)  
1
2
Press TUNER/BAND repeatedly to  
select “FM” or “AM.”  
What is the Radio Data  
System?  
Press TUNING + or – repeatedly to tune  
in the desired station.  
Radio Data System (RDS) is a broadcasting  
service that allows radio stations to send  
additional information along with the regular  
program signal. This tuner offers convenient  
RDS features like station name. RDS is  
available only on FM stations.*  
To cut the sound  
Press MUTING.  
Press MUTING again or VOLUME + to restore  
sound.  
To listen to an FM stereo program  
without stereo effect  
Note  
RDS may not work properly if the station you are tuned  
in is not transmitting the RDS signal properly or if the  
signal is weak.  
When an FM stereo program has static noise,  
press FM MODE repeatedly until “MONO”  
appears. There will be no stereo effect, but the  
reception will improve.  
* Not all FM stations provide RDS service, nor do they  
provide the same types of services. If you are not  
familiar with the RDS system, check with your local  
radio stations for details on RDS services in your  
area.  
Tips  
• To improve broadcast reception, adjust the supplied  
antennas, or connect a commercially available  
external antenna.  
• Press and hold TUNING + or –. The frequency  
indication changes and scanning stops when the  
system tunes in a station (Automatic Tuning).  
• To record the radio programs, use manual recording  
(pages 32 and 36).  
Receiving RDS broadcasts  
Simply select a station from the FM band.  
When you tune in a station that provides RDS  
services, the station name appears in the display.  
To check the RDS information  
Each time you press DISPLAY, the display  
changes cyclically as follows:  
Station name1) t Preset number2) and  
frequency t Clock display (for a few seconds)  
t Effect status (for a few seconds)  
1)  
If the RDS broadcast is not properly received, the  
station name may not appear in the display.  
2)  
Preset number is displayed only if you preset radio  
stations (page 28).  
30GB  
 
               
Tape – Play  
Tape – Recording  
Loading a tape  
Recording your favorite  
CD tracks on a tape  
1
Press Z PUSH OPEN/CLOSE on the  
unit.  
— CD-TAPE Synchro Recording  
2
Load a recorded/recordable tape into  
the cassette holder.  
You can record a whole CD on a tape.  
You can use TYPE I (normal) tape.  
1
2
3
Load a recordable tape.  
With the side  
you want to  
play/record  
Load a CD you want to record.  
facing forward.  
Press DVD (or FUNCTION + or –  
repeatedly) to switch the function to  
DVD.  
4
Press CD SYNC on the unit.  
The tape deck stands by for recording.  
“REC” flashes.  
Playing a tape  
5
Press z REC PAUSE/START on the  
unit.  
You can use TYPE I (normal) tape.  
Recording starts.  
1
2
Load a tape.  
Tips  
Press TAPE (or FUNCTION + or –  
repeatedly) to switch the function to  
TAPE.  
• If the tape reaches the end of the front side before  
completing the recording, the tape stops  
automatically and the CD/DVD player enters  
Resume Play mode.  
3
Press H (or TAPE N on the unit).  
• To continue the recording on the reverse side, press  
x twice to first cancel the Resume Play, eject and  
reload the tape, then perform steps 1 and 2 of “To  
(page 31). You can then continue Synchro Recording  
from the desired track.  
Playback starts.  
Other operations  
To  
Do this  
Stop play  
Press x.  
Fast-forward or Press m or M.  
rewind  
To perform Synchro Recording  
from a desired track  
Switch to TAPE Press TAPE N on the unit.  
You can select the first track in Synchro  
Recording.  
function from  
another source  
Playback starts automatically  
when a tape is loaded.  
Cut the sound  
Remove a tape  
Press MUTING.  
Press MUTING again or  
VOLUME + to restore sound.  
1 After performing steps 1 to 4, press . or  
> repeatedly to select the desired track  
number.  
Press Z PUSH OPEN/CLOSE on  
the unit in stop mode.  
2 Press z REC PAUSE/START on the unit  
while the selected track number is flashing.  
Recording starts.  
continued  
31GB  
 
                                     
To record a CD by specifying  
track order  
Recording on a tape  
manually  
You can record only your favorite CD tracks  
using Program Play. Between steps 3 and 4,  
perform steps 2 to 5 of “Creating your own  
— Manual Recording  
You can record just the portions you like from a  
disc (DVD, VIDEO CD, CD and MP3) or radio  
program on a tape.  
To stop recording  
Press x.  
You can also record from connected  
Notes  
• CD Synchro Recording is not available with DVD,  
VIDEO CD, MP3 audio tracks and JPEG image files.  
• You cannot listen to other sources while recording.  
• If the play mode is set to Repeat Play or Shuffle Play,  
it automatically switches to Normal Play in step 4.  
• The sound effect automatically switches to “FLAT”  
in step 4.  
Use buttons on the unit for the operation.  
1
2
Load a recordable tape.  
Press one of the following buttons to  
select the desired source to record.  
• DVD NX: To record from this  
system’s CD/DVD player. Playback  
starts automatically if a disc is loaded.  
Press x to stop playback. To cancel  
Resume Play, press x twice.  
• TUNER/BAND: To record from this  
system’s tuner.  
• TV: To record from the optional  
component connected to TV IN L/R  
jacks.  
3
4
Press z REC PAUSE/START.  
The tape deck stands by for recording.  
“REC” flashes.  
Press z REC PAUSE/START, then start  
playing the desired source to record.  
Recording starts.  
To stop recording  
Press x.  
Notes  
• You cannot listen to other sources while recording.  
• If no sound is being recorded when recording from a  
DVD, set “Dolby Digital” or “DTS” to “PCM” under  
“AV” in the Setup Display.  
• The sound effect automatically switches to “FLAT”  
in step 3.  
Tip  
For recording from the tuner:  
If noise is heard while recording from the tuner, move  
the respective antenna to reduce the noise.  
32GB  
 
               
Singing along  
(CMT-SX2D Asian and Oceanian  
models only)  
Sound Adjustment  
Selecting the sound effect  
You can sing along with a disc by connecting an  
optional microphone.  
Press PRESET EQ repeatedly to select the  
preset you desire.  
The preset name appears in the display.  
Adjusting the microphone  
To cancel the sound effect  
Press PRESET EQ repeatedly until “FLAT”  
appears in the display.  
Use buttons on the unit for the operation.  
1
2
Turn MIC LEVEL to MIN to turn down  
the microphone control level.  
Sound effect options  
EQ  
Effect  
Connect an optional microphone to the  
MIC jack.  
ROCK  
Bass and treble are greatly boosted.  
This gives rock and dance music tracks  
even more powerful sound.  
3
4
Start playing the music.  
Adjust the microphone volume by  
turning MIC LEVEL.  
JAZZ  
Bass and treble are somewhat boosted.  
This makes live instrumental  
performances such as jazz or other  
small ensembles sparkle without losing  
the natural tones of the instruments.  
After you have finished  
Turn MIC LEVEL to MIN and disconnect the  
microphone from the MIC jack.  
CLASSIC  
Unwanted treble is attenuated, letting  
you enjoy music with a relaxed feeling.  
This mode is suitable for orchestra,  
piano solos and other classical music.  
To use VIDEO CDs or DVDs  
Turn on your TV and switch it to the appropriate  
video input.  
TV  
Treble is greatly boosted. This makes it  
easier to hear TV newscasts, drama  
dialog and other speech.  
Tip  
To sing karaoke of multiplex CD, press AUDIO on the  
remote repeatedly during play to select “Left” or  
MP3  
Bass is boosted and treble is greatly  
boosted to compensate the high range  
that is lost during compression. This  
lets you enjoy sound that is closer to  
the original.  
MOVIE  
Expansive, reverberating sounds are  
artificially reproduced and the bass is  
also boosted. This lets you enjoy  
movies with a full sound-space feeling  
like being in a movie theater.  
continued  
33GB  
 
               
Mixing and recording sounds  
You can “mix” sounds by playing one of the  
components and singing or speaking into a  
microphone (not supplied).  
The mixed sound can be recorded on a tape.  
Use buttons on the unit for the operation.  
1
2
3
Prepare the source you want to mix.  
Load a recordable tape.  
Press the function button of the source  
you want to record (e.g., DVD NX).  
When you want to record from a disc, press  
x twice to cancel Resume Play.  
4
5
Press z REC PAUSE/START.  
The tape deck stands by for recording.  
“REC” flashes.  
Press z REC PAUSE/START, and then  
start singing, speaking or playing the  
desired source.  
Recording starts.  
To stop recording  
Press x.  
Tips  
• If acoustic feedback (howling) occurs, move the  
microphone away from the speakers or change the  
direction of the microphone.  
• If you want to record your voice through the  
microphone only, you can do so by selecting the  
DVD function when a disc is loaded and not playing  
a disc.  
34GB  
 
   
Waking up to music  
— Play Timer  
Timer  
Falling asleep to music  
— Sleep Timer  
You can wake up to music at a preset time. Make  
sure you have set the clock (see “Setting the  
You can set the system to turn off after a certain  
time, so that you can fall asleep to music.  
Use buttons on the remote for the operation.  
1
Prepare the sound source you want to  
play.  
Press SLEEP.  
Each time you press the button, the minute  
display (the turn-off time) changes cyclically as  
follows:  
AUTO* t 90 t 80 t 70 t t 10 t  
OFF  
• CD/DVD: Load a disc.  
• Tape: Load a tape.  
• Tuner: Tune in the preset radio station  
2
3
Press CLOCK/TIMER SET.  
* The system automatically turns off in 100 minutes or  
after the current disc or tape finishes playing.  
Press . or > repeatedly to select  
“PLAY SET,” then press ENTER.  
Other operations  
“ON” appears and the hour indication  
flashes.  
To  
Press  
Check the  
SLEEP once.  
4
Set the time to start playing.  
remaining time*  
Press . or > repeatedly to set the  
hour, then press ENTER.  
Change the time SLEEP repeatedly to select the  
to turn off time you want.  
The minute indication flashes.  
Press . or > repeatedly to set the  
minute, then press ENTER.  
Cancel the Sleep SLEEP repeatedly until “SLEEP  
Timer Function OFF” appears.  
* You cannot check the remaining time if you select  
“AUTO.”  
5
6
Set the time to stop playing following  
the same procedure as step 4.  
Note  
Do not set to “AUTO” during Synchro Recording on a  
tape.  
Press . or > repeatedly until the  
desired sound source appears.  
Tip  
Each time you press the button, the display  
changes cyclically as follows:  
You can use the Sleep Timer, even if you have not set  
the clock.  
t
y
T
TUNER  
DVD PLAY  
t
T
TAPE PLAY  
7
Press ENTER.  
The type of timer (“PLAY TIMER”), the  
start time, the stop time, and the sound  
source appear in turn, before the original  
display returns.  
8
9
Press VOLUME + or – to adjust the  
volume.  
Press ?/1 to turn off the system.  
continued  
35GB  
 
                       
Other operations  
Timer recording radio  
programs  
To  
Do this  
Check the setting  
1 Press CLOCK/TIMER  
SELECT.  
2 Press . or >  
repeatedly until “PLAY  
SEL” appears, then press  
ENTER.  
— Rec Timer  
You can record a preset radio station from a  
specified time.  
To timer record, you must first preset the radio  
Change the setting Start over from step 1.  
Cancel the timer  
1 Press CLOCK/TIMER  
SELECT.  
2 Press . or >  
repeatedly until “TIMER  
OFF” appears, then press  
ENTER.  
Use buttons on the remote for the operation.  
1
2
Press CLOCK/TIMER SET.  
Press . or > repeatedly to select  
“REC SET,” then press ENTER.  
Notes  
• You cannot activate the Play Timer and Rec Timer at  
the same time.  
“ON” appears and the hour indication  
flashes.  
• If you use the Play Timer and the Sleep Timer at the  
same time, the setting with the earlier end time has  
priority.  
3
4
Set the time to start recording.  
Press . or > repeatedly to set the  
hour, then press ENTER.  
• The system turns on 15 seconds before the preset  
time. Do not operate the system from the time the  
system turns on until the play starts.  
The minute indication flashes.  
Press . or > repeatedly to set the  
minute, then press ENTER.  
• If the system is on 15 seconds before the preset time,  
the Play Timer will not be activated.  
• You cannot use the optional component connected to  
TV IN L/R jacks as the sound source for Play Timer.  
Set the time to stop recording following  
the same procedure as step 3.  
The type of timer (“REC TIMER”), the start  
time, the stop time, and “TUNER REC”  
appear in turn, before the original display  
returns.  
5
6
Load a recordable tape.  
Tune in the preset radio station (see  
7
Press ?/1 to turn off the system.  
36GB  
 
           
Other operations  
To  
Do this  
Display  
Check the setting  
1 Press CLOCK/TIMER  
SELECT.  
Turning off the display  
— Power Saving Mode  
2 Press . or >  
repeatedly until “REC SEL”  
appears, then press ENTER.  
Change the setting Start over from step 1.  
The clock display can be turned off to minimize  
the amount of power consumed during standby  
(Power Saving Mode).  
Cancel the timer  
1 Press CLOCK/TIMER  
SELECT.  
2 Press . or >  
repeatedly until “TIMER  
OFF” appears, then press  
ENTER.  
Press DISPLAY repeatedly while the  
system is off until the clock display  
disappears.  
To cancel Power Saving Mode  
Notes  
Press DISPLAY while the system is off. Each  
time you press the button, the display switches  
as follows:  
Clock display* y No display (Power Saving  
Mode)  
• You cannot activate the Play Timer and Rec Timer at  
the same time.  
• If you use the Rec Timer and the Sleep Timer at the  
same time, the setting with the earlier end time has  
priority.  
* The clock is displayed only if you set the clock.  
• The system turns on 15 seconds before the preset  
time. Do not operate the system from the time the  
system turns on until the play starts.  
Tips  
• The timer continues to operate in Power Saving  
Mode.  
• If the system is on 15 seconds before the preset time,  
the Rec Timer will not be activated.  
?/1 indicator lights up even in Power Saving Mode.  
• The volume is reduced to minimum during  
recording.  
• Note that if the Rec Timer is set at the same time as  
the Play Timer sound source is set to tape, the Rec  
Timer sound may be recorded onto the tape.  
Adjusting the brightness  
of the indicators  
Press DIMMER repeatedly.  
Each time you press the button, the setting  
changes cyclically as follows:  
DIMMER OFF t DIMMER 1 t  
DIMMER 2*  
* DIMMER 2 is the darkest.  
37GB  
 
               
x When you press DISPLAY in stop mode  
Viewing information  
about the disc in the  
display  
Total title/track number of the disc and total  
playing time of the current disc3) t Clock  
display (for a few seconds) t Effect status (for  
a few seconds)  
1)  
These are not displayed during Shuffle Play or  
Program Play.  
You can check the playing time and remaining  
time of the current track or that of the disc.  
2)  
May not appear with still images.  
3)  
VIDEO CDs and CDs only  
Checking the disc information  
(DVD/VIDEO CD/CD/MP3/  
JPEG)  
Press DISPLAY.  
Each time you press the button, the display  
changes cyclically as follows:  
x When playing a DVD  
Elapsed playing time of the current title t  
Remaining time of the current chapter t  
Remaining time of the current title t Clock  
display (for a few seconds) t Effect status (for  
a few seconds)  
x When playing a CD/VIDEO CD without  
PBC function  
Elapsed playing time of the current track t  
Remaining time of the current track t  
Remaining time of the disc1) t Clock display  
(for a few seconds) t Effect status (for a few  
seconds)  
x When playing a VIDEO CD with PBC  
functions (Ver. 2.0)  
Elapsed playing time on the current track2) t  
Clock display (for a few seconds) t Effect  
status (for a few seconds)  
x When playing an MP3  
Elapsed playing time of the current track t  
Clock display (for a few seconds) t Effect  
status (for a few seconds)  
x When playing a JPEG  
Current file number t Clock display (for a few  
seconds) t Effect status (for a few seconds)  
38GB  
 
   
Viewing information  
about the disc in the  
on-screen display  
Viewing the tuner  
information in the display  
Press DISPLAY while listening to the radio.  
Each time you press the button, the display  
changes cyclically as follows:  
You can check the playing time and remaining  
time of the current title, chapter or track.  
1)  
2)  
Station name t Preset number and  
frequency t Clock display (for a few seconds)  
t Effect status (for a few seconds)  
Press DISPLAY.  
Each time you press the button, the display  
changes cyclically as follows:  
1) European model only  
2) Preset number is displayed only if you preset radio  
stations (page 28).  
x When playing a DVD  
Elapsed playing time of the current title t  
Remaining time of the current chapter t  
Remaining time of the current title  
x When playing a VIDEO CD  
Elapsed playing time of the current track t  
Remaining time of the current track* t  
Remaining time of the current disc*  
x When playing a CD  
Elapsed playing time of the current track t  
Remaining time of the current track t  
Remaining time of the current disc  
x When playing an MP3  
Elapsed playing time of the current track  
x When playing a JPEG  
Current file number and total number of files  
* When playing a VIDEO CD without PBC function  
To turn off the display  
Press DISPLAY repeatedly until the display  
disappears.  
39GB  
 
     
Number  
9
TV’s input source  
COMPONENT 1 INPUT  
COMPONENT 2 INPUT  
Optional Components  
CLEAR  
PRESET EQ COMPONENT 3 INPUT  
ENTER COMPONENT 4 INPUT  
Controlling the TV with the  
remote  
2
Press and hold TV CH + while entering  
the code for transmit time (see the  
table below) using the number buttons.  
You can use the following buttons on the remote  
to operate a Sony TV.  
The transmit time from the remote is  
selected.  
To  
Press  
Turn the TV on or off TV ?/1 while holding  
down the TV button  
Number  
Transmit time  
Switch the TV’s input TV/VIDEO while holding  
source between the TV down the TV button  
and other input sources  
1
2
3
4
5
6
7
8
0.5 (Default)  
1
1.5  
2
Change the TV channels TV CH +/– or the number  
buttonswhile holding down  
the TV button  
2.5  
3
Adjust the volume of  
the TV speaker(s)  
TV VOL +/– while holding  
down the TV button  
3.5  
4
Notes  
Using the THEATRE SYNC  
function  
• This function is only for SONY TV series, however,  
some TV products may also not work.  
• If this function does not work, change the transmit  
time. The transmit time varies depending on the TV.  
• If distance between the TV and this system is too far,  
this function may not work. Install the system near  
the TV.  
THEATRE SYNC allows you to turn on your  
SONY TV and this system, change the system  
mode to “DVD,” and then switch the TV’s input  
source you set with one button push.  
• Keep the remote pointed in the direction of the TV  
and this system.  
Use the remote for the operation.  
• For European and Russian models, if the T LINE-  
TV jack and COMPONENT VIDEO OUT jacks are  
both connected to a TV, pressing the THEATRE  
SYNC button may not switch the TV’s input source,  
depending on the TV.  
1
Press and hold TV/VIDEO while  
entering the code for the TV’s input  
source connected to this system (see  
the table below) using the number  
buttons.  
TV’s input source is selected.  
Number  
TV’s input source  
No input source (Default)  
VIDEO1  
0
1
2
3
4
5
6
7
8
VIDEO2  
VIDEO3  
VIDEO4  
VIDEO5  
VIDEO6  
VIDEO7  
VIDEO8  
40GB  
 
               
Hooking up optional components  
To enhance your system, you can connect optional components. Refer to the operating instructions  
provided with each component. North American model is used for illustration purpose.  
TV or VCR, etc.  
Amplifier or MD deck  
From the audio output jack  
of the connected  
component  
To the digital input jack of  
the digital component  
• You cannot make a digital recording of a copy  
guarded disc using a digital component connected to  
this system. Also, playback may not be possible  
depending on the connected component.  
A DIGITAL OUT (OPTICAL) jack  
Use a digital optical cord (square, not supplied)  
to connect an amplifier, MD deck or DAT deck  
with a digital optical input jack. Sound is then  
output when the system function is set to DVD.  
By connecting this system to the optical input  
jack of the optional amplifier equipped with  
Dolby Digital or DTS decoder, you can enjoy  
the 5.1 channel sound.  
• When you connect a component that does not support  
Dolby Digital or DTS to the DIGITAL OUT  
(OPTICAL) jack and output a Dolby Digital or DTS  
bit stream, noise may be heard from the connected  
component.  
B TV IN L/R jacks  
In addition, when the CD or DVD audio is linear  
PCM, you can make a digital recording from this  
system to an MD deck or DAT deck.  
Use audio cords (not supplied) to connect an  
optional analog component (TV or VCR, etc.) to  
these jacks. You can then record or listen to from  
the component through this system.  
Notes  
• When playing MP3 audio tracks, you cannot output  
digital audio.  
• You can record digital audio from this system only  
when DVD function is selected.  
41GB  
 
   
Listening to audio from a  
connected component  
Enjoying the 5.1 channel  
sound with the optional  
amplifier  
Use buttons on the unit for the operation.  
1
Connect audio cords.  
1
Connect a digital optical cord.  
2
Turn the VOLUME control towards – to  
turn down the volume.  
2
Connect 6 speakers to an AV amplifier  
equipped with a decoder.  
For the speaker placement, refer to the  
operating instructions supplied with the  
connected amplifier.  
3
4
Press TV to switch the function to TV.  
Start playing the connected  
component.  
3
Press  
DISPLAY in stop mode.  
5
Turn the VOLUME control to adjust the  
volume.  
The Setup Display appears.  
4
5
Press < or , repeatedly to select  
“AV,” then press ENTER.  
Press M or m repeatedly to select  
“Dolby Digital” or “DTS,” then press  
ENTER.  
6
7
8
Press M or m repeatedly to select “Bit  
Stream,” then press ENTER.  
Press  
DISPLAY to turn off the Setup  
Display.  
Switch the output to 5.1 channel Dolby  
Digital sound or 5.1 channel DTS  
sound.  
42GB  
 
             
Recording audio from a  
connected component  
Recording on a connected  
component  
1
Connect audio cords.  
1
Connect a digital optical cord.  
2
Start recording manually.  
2
Press DVD (or FUNCTION + or –  
repeatedly) to switch the function to  
DVD.  
Playback starts automatically if a disc with  
auto playback function is loaded. Press xto  
stop playback. To cancel Resume Play,  
press x twice.  
3
4
Start recording with the connected  
digital component (MD deck, etc.).  
Refer to the operating instructions provided  
with the connected component.  
Press H (or DVD NX on the unit) to  
start playing.  
Notes  
• You cannot make a digital recording in the following  
cases.  
– Copy guarded DVDs  
– DVD Dolby Digital or DTS bit stream output  
– CD-Rs/CD-RWs recorded in music CD format  
• You cannot make a recording when “Dolby Digital”  
or “DTS” under “AV” is set to “Bit Stream.”  
43GB  
 
         
General  
“– –:– –” appears in the display.  
• A power interruption has occurred. Set the clock  
(page 13) and timer settings (pages 35 and 36)  
again.  
Troubleshooting  
Problems and remedies  
The clock setting/radio presetting/timer is  
canceled.  
• Redo the following:  
Should you encounter a problem with your  
system, do the following:  
1 Make sure the power cord and speaker  
cords are correctly and firmly connected.  
2 Find your problem in the troubleshooting  
checklist below and take the indicated  
corrective action.  
If the problem persists after doing all of the  
above, consult your nearest Sony dealer.  
Note that if service personnel changes some  
parts during repair, these parts may be retained.  
There is no sound.  
• Press VOLUME +.  
• Make sure the headphones are not connected.  
• Check the speaker connections (page 10).  
• There is no audio output during Rec Timer.  
• The system is in pause mode or in slow-motion  
play mode. Press H (or DVD NX on the unit)  
to return to Normal Play.  
When the ?/1 indicator flashes  
Immediately unplug the power cord and  
check the following items.  
• Set “Dolby Digital” or “DTS” under “AV” to  
“PCM.”  
• If your system has a voltage selector, is the  
voltage selector set to the correct voltage?  
Check the voltage for your region, then  
make sure the voltage selector is set  
correctly.  
There is severe hum or noise.  
• Move the system away from the source of noise.  
• Connect the system to a different wall outlet.  
• Install a noise filter (commercially available) to  
the power cord.  
• Are the + and – speaker cords short-  
circuited?  
The timer cannot be set.  
• Set the clock again (page 13).  
• Are you using the supplied speakers?  
• Is anything blocking the ventilation holes  
on the rear of the system?  
Check all the above items and fix any  
problems found. After ?/1 indicator stops  
flashing, reconnect the power cord and turn  
on the system. If the indicator still flashes, or  
if the cause of the problem cannot be found  
even after checking all the above items,  
consult your nearest Sony dealer.  
The timer does not function.  
• Check the timer setting and set the correct time  
(pages 35 and 36).  
• Cancel the Sleep Timer function (page 35).  
The remote does not function.  
• Remove the obstacle.  
• Move the remote closer to the system.  
• Point the remote at the system’s sensor.  
• Replace the batteries (R6/size AA).  
• Locate the system away from the fluorescent light.  
There is acoustic feedback.  
• Reduce the volume.  
• Move the microphone away from the speakers or  
change the direction of the microphone (CMT-  
SX2D Asian and Oceanian models only).  
44GB  
 
     
The color irregularity on a TV screen persists.  
• Turn off the TV set once, then turn it on after 15  
to 30 minutes. If the color irregularity still  
persists, place the speakers farther away from the  
TV set.  
The sound skips.  
• Wipe the disc clean (page 50).  
• Replace the disc.  
• Try moving the system to a place without  
vibration (e.g., on top of a stable stand).  
• Try moving the speakers away from the system, or  
placing them on separate stands. When you listen  
to a track with bass sounds at high volume, the  
speaker vibration may cause the sound to skip.  
Speakers  
Sound comes from one channel or  
unbalanced left and right volume.  
• Check the speaker connection and speaker  
placement.  
Play does not start from the first track.  
• Press PLAY MODE repeatedly until both “PGM”  
and “SHUF” disappear to return to Normal Play.  
• Resume Play has been selected. Press x in stop  
mode, then start playback (page 15).  
• The source being played back is monaural.  
Sound lacks bass.  
• Check that the speaker’s + and – jacks are  
connected correctly.  
• The title, DVD or PBC menu automatically  
appears on the TV screen.  
Playback starts automatically.  
• The DVD features an auto playback function.  
DVD/VIDEO CD/CD/MP3/JPEG  
player  
Playback stops automatically.  
• Some discs may contain an auto pause signal.  
While playing such a disc, the playback stops at  
the auto pause signal.  
The disc tray does not open and “LOCKED”  
appears.  
You cannot perform some functions such as  
Stop, Search, Slow-motion Play, Repeat Play,  
Shuffle Play or Program Play.  
• Depending on the disc, you may not be able to do  
some of the operations above. Refer to the  
• Contact your Sony dealer or local authorized Sony  
service facility.  
The disc tray does not close.  
• Place the disc correctly.  
• Always close the tray by pressing Z on the unit.  
Trying to press the tray closed with your fingers  
may cause problems with the player.  
operating instructions supplied with the disc.  
MP3 audio track cannot be played back.  
• Recording was not performed according to the  
ISO9660 Level 1 or Level 2 format, or Joliet in the  
expansion format.  
The disc does not eject.  
• You cannot eject the disc during CD Synchro  
Recording. Press x to cancel the CD Synchro  
Recording, then press Z on the unit to eject the  
disc.  
• The MP3 audio track does not have the extension  
“.MP3”.  
• The data is not stored in MP3 format.  
• Discs containing files other than MPEG1 Audio  
Layer-3 files cannot be played.  
• Consult your nearest Sony dealer.  
Play does not start.  
• Set “Data CD Priority” under “AV” to “MP3”  
• Open the disc tray and check whether a disc is  
loaded.  
• Playback is possible up to 16 levels.  
• The album contains more than 999 MP3 audio  
tracks.  
• Wipe the disc clean (page 50).  
• Replace the disc.  
• Place the disc that this system can play (page 6).  
• Place the disc correctly.  
MP3 audio tracks take longer to play back than  
others.  
• After the system reads all tracks on the discs,  
playback may take more time than usual if:  
– the number of albums or tracks on the disc is  
very large.  
• Place the disc in the tray with the label side up.  
• Remove the disc and wipe away the moisture on  
the disc, then leave the system turned on for a few  
hours until the moisture evaporates.  
• Press H (or DVD NX on the unit) to start play.  
• The region code on the DVD does not match the  
system.  
– the album and track organization structure is  
very complex.  
continued  
45GB  
 
• For European and Russian models, when  
connecting your TV and the T LINE-TV jack of  
this system using a SCART cable (not supplied),  
make sure that the VIDEO OUT SELECTOR is  
set to EURO AV (RGB signals are not output  
when the VIDEO OUT SELECTOR is set to  
COMPONENT). Also in this case set the system  
to interlace format (page 24). When connecting  
your TV and the COMPONENT VIDEO OUT  
jack of this system using a component cable (not  
supplied), make sure the VIDEO OUT  
The JPEG image file cannot be played.  
• The data CD is not recorded in JPEG format that  
conforms to ISO9660 Level 1/Level 2 or Joliet.  
• The JPEG image file does not have the extension  
“.JPG” or “.JPEG”.  
• The data is not formatted in JPEG even though it  
has the extension “.JPG” or “.JPEG”.  
• Set “Data CD Priority” under “AV” to “JPEG”  
• Playback is possible up to 16 levels.  
• The album contains more than 999 JPEG image  
files.  
SELECTOR is set to COMPONENT.  
• For European and Russian models, turn off the  
system when switching the VIDEO OUT  
SELECTOR. The setting does not change while  
the system is on.  
The sound loses stereo effect when you play a  
VIDEO CD or CD.  
• Press AUDIO repeatedly during playback to  
select “Stereo” (see “Changing the sound”  
• Except for European and Russian models, when  
connecting your TV and the VIDEO OUT jack of  
this system using the video cable (supplied), set  
the system to interlace format (page 24).  
• You have set progressive format but your TV  
cannot accept the signal in progressive format. In  
this case, return the setting to interlace format  
(default setting) (page 24).  
• Make sure the system is connected appropriately.  
The recording was not done properly when  
making a digital recording from the CD/DVD  
player of this system to an optional  
component connected to the DIGITAL OUT  
(OPTICAL) jack.  
• Audio data is output from the DIGITAL OUT  
(OPTICAL) jack without any sound processing,  
so that the audio data is output slightly ahead of  
the sound from the speakers. Therefore, start the  
optional component recording in advance when  
making a digital recording to a connected optional  
component (MD deck, etc.).  
• Even if your TV is compatible with progressive  
format (525p/625p) signals, the image may be  
affected when you set progressive format. In this  
case, return the setting to interlace format (default  
setting) (page 24).  
Picture noise appears.  
• Clean the disc.  
• When you play a VIDEO CD, the color system is  
different. Set the color system to match your TV  
(page 23) (Asian and Oceanian models only).  
Picture  
The aspect ratio of the screen cannot be  
changed even though you set “TV Type”  
under “AV” in the Setup Display when you  
play a wide picture.  
• The aspect ratio is fixed on your DVD.  
• Depending on the TV, you may not change the  
aspect ratio.  
There is no picture.  
• Press H (or DVD NX on the unit).  
• Check that the system is connected securely.  
• The video cable is damaged. Replace it with a new  
one.  
• Make sure you connect the system to the video  
input jack of your TV (page 10).  
Messages do not appear on the screen in the  
language you want.  
• Make sure you turn on the TV and operate the TV  
correctly.  
• Select the language you want for the on-screen  
display in “OSD” under “Language” in the Setup  
Display (page 22).  
• Make sure you select the video input on the TV so  
that you can view the pictures from the system.  
• When you play a VIDEO CD, make sure you set  
the color system correctly, according to your TV  
(color) system (Asian and Oceanian models only).  
• Make sure you connect the system and your TV  
using the video/SCART cable so that you can  
view the pictures.  
The language for the sound track cannot be  
changed.  
• Multilingual tracks are not recorded on the DVD  
being played.  
• The DVD prohibits changing the language for the  
sound track.  
46GB  
 
The subtitle language cannot be changed.  
• Multilingual subtitles are not recorded on the  
DVD being played.  
Noise increases or the high frequencies are  
erased.  
• The record/playback heads are magnetized.  
Demagnetize them (page 50).  
• The DVD prohibits changing the subtitles.  
The tape does not record.  
• No cassette is loaded. Load a cassette.  
• The tab has been removed from the cassette.  
Cover the broken tab with adhesive tape  
The subtitle cannot be turned off.  
• The DVD prohibits turning off subtitles.  
The angles cannot be changed.  
• Multi-angles are not recorded on the DVD being  
played.  
• The tape has wound to the end.  
• Set “Dolby Digital” or “DTS” under “AV” to  
“PCM.”  
• The DVD prohibits changing the angles.  
“TAPE ERR” appears in the display.  
• Press ?/1 to turn off the system and remove any  
tapes from the cassette holder. Then disconnect  
the power cord and reconnect it. Then press ?/1  
to turn on the system.  
Tuner  
Severe hum or noise/stations cannot be  
received. (“TUNED” or “STEREO” flashes in  
the display)  
• Set the proper band and frequency (page 28).  
• Connect the antenna properly (page 10).  
• Find a place and an orientation that provide good  
reception, then set up the antenna again. If you  
cannot obtain good reception, we recommend you  
connect a commercially available external  
antenna.  
If “TAPE ERR” still appears, consult your nearest  
Sony dealer.  
Optional components  
There is no sound.  
• Refer to General item “There is no sound.”  
(page 44) and check the condition of the system.  
• Connect the component properly (page 41) while  
checking:  
• The supplied FM lead antenna receives signals  
along its entire length, so make sure you extend it  
fully.  
• Locate the antennas as far away from the speaker  
cords as possible.  
– if the cords are connected properly.  
– if the cord plugs are firmly inserted all the way.  
• Turn on the connected component.  
• Refer to the operating instructions supplied with  
the connected component and start playing.  
• Consult your nearest Sony dealer if the supplied  
AM antenna has come off the plastic stand.  
• Try turning off surrounding electrical equipment.  
A stereo FM program cannot be received in  
stereo.  
• Press FM MODE repeatedly until “MONO”  
disappears.  
Tape deck  
The tape does not record or play, or there is a  
decrease in sound level.  
• The heads are dirty. Clean them (page 50).  
• The record/playback heads are magnetized.  
Demagnetize them (page 50).  
The tape does not erase completely.  
• The record/playback heads are magnetized.  
Demagnetize them (page 50).  
There is excessive wow or flutter, or the sound  
drops out.  
• The capstans or pinch rollers are dirty. Clean them  
continued  
47GB  
 
If the system still does not  
operate properly after performing  
the above measures, reset the  
system as follows:  
Messages  
One of the following messages may appear or  
flash in the display during operation.  
Use buttons on the unit for the operation.  
1 Remove the disc if it is loaded.  
2 Disconnect the power cord.  
3 Reconnect the power cord.  
4 Press ?/1 to turn on the system.  
DVD/VIDEO CD/CD/MP3/JPEG  
CAN’T PLAY  
• A disc that cannot be played was inserted.  
• A disc with an unsupported Region code was  
inserted.  
5 Press DVD NX to switch the function to  
DVD and make sure that “NO DISC” is  
displayed.  
NO DISC  
There is no disc in the unit.  
NOT IN USE  
6 Press x, PLAY MODE and DVD NX at the  
You pressed an invalid button.  
same time.  
The system is reset to the factory settings except  
for DVD settings. You should set the settings  
you made, such as the preset stations, clock, and  
timer.  
Tape  
NO TAB  
You cannot record the tape because the tab has been  
removed from the cassette.  
To return the DVD setup to the  
default settings*, perform reset  
as follows:  
NO TAPE  
There is no tape in the tape deck.  
TAPE ERR  
A malfunction of the tape deck has occurred.  
The operation can only be set using the TV  
screen.  
1 Press  
DISPLAY in stop mode.  
2 Press < or , repeatedly to select “Reset,”  
then press ENTER.  
3 Press < or , repeatedly to select “YES,”  
then press ENTER.  
It takes a few seconds to complete. Do not  
press ?/1 when resetting the system.  
* Except for Rating (Parental Control) settings  
48GB  
 
             
In case color irregularity is observed  
on nearby a TV screen  
With the magnetically shielded type of speaker system,  
the speakers can be installed near a TV set. However,  
color irregularity may still be observed on the TV  
screen depending on the type of your TV set.  
Additional Information  
Precautions  
On operating voltage  
If color irregularity is observed…  
Turn off the TV set once, then turn it on after 15 to 30  
minutes.  
Before operating the system, check that the operating  
voltage of your system is identical with the voltage of  
your local power supply.  
If color irregularity is observed  
again…  
Place the speakers farther away from the TV set.  
On safety  
• The unit is not disconnected from the AC power  
source (mains) as long as it is connected to the wall  
outlet, even if the unit itself has been turned off.  
• Unplug the system from the wall outlet (mains) if it  
is not to be used for an extended period of time. To  
disconnect the power cord (mains lead), pull it out by  
the plug. Never pull the cord itself.  
IMPORTANT NOTICE  
Caution: This system is capable of holding a still  
video image or on-screen display image on your  
television screen indefinitely. If you leave the still  
video image or on-screen display image displayed  
on your TV for an extended period of time you risk  
permanent damage to your television screen.  
Projection televisions are especially susceptible to  
this.  
• Should any solid object or liquid fall into the system,  
unplug the system and have it checked by qualified  
personnel before operating it any further.  
• AC power cord must be changed only at the qualified  
service shop.  
On operation  
On placement  
• If the system is brought directly from a cold to a  
warm location, or is placed in a very damp room,  
moisture may condense on the lens inside the CD/  
DVD player. Should this occur, the system will not  
operate properly. Remove the disc and leave the  
system turned on for about an hour until the moisture  
evaporates.  
• Do not place the system in an inclined position.  
• Do not place the system in locations where it is;  
– Extremely hot or cold  
– Dusty or dirty  
– Very humid  
– Subject to vibrations  
– Subject to direct sunlight.  
• When you move the system, take out any disc.  
• Use caution when placing the unit or speakers on  
surfaces that have been specially treated (with wax,  
oil, polish, etc.) as staining or discoloration of the  
surface may result.  
If you have any questions or problems concerning your  
system, please consult your nearest Sony dealer.  
On heat buildup  
• Although the system heats up during operation, this  
is not a malfunction.  
• Place the system in a location with adequate  
ventilation to prevent heat buildup in the system.  
• If you continuously use this system at a high volume,  
the cabinet temperature of the top, side and bottom  
rises considerably. To avoid burning yourself, do not  
touch the cabinet.  
• To prevent a malfunction, do not cover the  
ventilation hole for the cooling fan.  
continued  
49GB  
 
   
Notes on discs  
• Before playing, clean the disc with a cleaning cloth.  
When using a tape longer than  
90 minutes  
Wipe the disc from the center out.  
The tape is very elastic. Do not change the tape  
operations such as play, stop, and fast-winding  
frequently. The tape may get entangled in the tape  
deck.  
• Do not use solvents such as benzine, thinner,  
commercially available cleaners or anti-static spray  
intended for vinyl LPs.  
• Do not expose the disc to direct sunlight or heat  
sources such as hot air ducts, nor leave it in a car  
parked in direct sunlight.  
Cleaning the tape heads  
Clean the tape heads after every 10 hours of use. Be  
sure to clean the tape heads before you start an  
important recording or after playing an old tape. Use a  
separately sold dry-type or wet-type cleaning cassette.  
For details, refer to the instructions of the cleaning  
cassette.  
• Do not use discs encircled with a protection ring.  
This may cause a malfunction to the system.  
• When using discs that have glue or similar tacky  
substance on the label side of the disc or that used a  
special ink when the label was printed, there is a  
chance that the disc or label may become attached to  
parts inside this unit. When this occurs, it may not be  
possible to remove the disc, and may also cause this  
unit to malfunction. Be sure to check that the label  
side of the disc is not sticky before using.  
The following types of disc should not be used:  
– Rental or used discs with attached seals where the  
glue extends beyond the seal. The perimeter of the  
seal on the disc is tacky.  
Demagnetizing the tape heads  
Demagnetize the tape heads and the metal parts that  
have contact with the tape after every 20 to 30 hours of  
use with a separately sold demagnetizing cassette. For  
details, refer to the instructions of the demagnetizing  
cassette.  
– Discs that have labels printed using a special ink  
that feels tacky when touched.  
Cleaning the cabinet  
Clean the cabinet, panel and controls with a soft cloth  
slightly moistened with mild detergent solution. Do not  
use any type of abrasive pad, scouring powder or  
solvent such as thinner, benzine or alcohol.  
To save a tape permanently  
To prevent a tape from being accidentally recorded  
over, break off the cassette tab from side A or B as  
illustrated.  
Break off the  
cassette tab  
If you later want to reuse the tape for recording, cover  
the broken tab with adhesive tape.  
Before placing a cassette in the tape  
deck  
Take up any slack in the tape. Otherwise, the tape may  
get entangled in the parts of the tape deck and become  
damaged.  
50GB  
 
       
Other models:  
CMT-DX2D/SX2D  
Specifications  
The following measured at AC 120 V, 240 V, 50/60 Hz  
DIN power output (rated): 40 + 40 watts  
(6 ohms at 1 kHz, DIN)  
Continuous RMS power output (reference):  
50 + 50 watts  
Amplifier section  
AUDIO POWER SPECIFICATIONS  
(CMT-DX2D USA model only)  
(6 ohms at 1 kHz, 10%  
THD)  
CMT-DX2D  
POWER OUTPUT AND TOTAL HARMONIC  
DISTORTION:  
Inputs  
TV IN (phono jacks):  
voltage 1 V,  
impedance 47 kilohms  
MIC (phone jack) (CMT-SX2D Asian and Oceanian  
With 6 ohm loads, both channels driven, from  
120 – 10,000 Hz: rated 50 watts per channel  
minimum RMS power, with no more than 10%  
total harmonic distortion from 250 milliwatts to  
rated output.  
models only):  
sensitivity 1 mV,  
impedance 10 kilohms  
Outputs  
VIDEO OUT (phono jack) (except for European and  
Russian models):  
max. output level  
North American model:  
CMT-DX2D  
1 Vp-p, unbalanced, Sync  
negative, load impedance  
75 ohms  
Continuous RMS power output (reference):  
50 + 50 watts (6 ohms at  
1 kHz, 10% THD)  
Total harmonic distortion less than 0.07% (6 ohms at  
1 kHz, 25 W)  
LINE-TV (European and Russian models only):  
max. output level 1 Vp-p,  
unbalanced, Sync  
negative, load impedance  
75 ohms  
COMPONENT VIDEO OUT:  
Y: 1 Vp-p, 75 ohms  
PB, PR: 0.7 Vp-p, 75 ohms  
DIGITAL OUT (OPTICAL) (Square optical connector  
jack, rear panel)  
European and Russian models:  
CMT-DX2D  
DIN power output (rated): 40 + 40 watts (6 ohms at  
1 kHz, DIN)  
Continuous RMS power output (reference):  
50 + 50 watts (6 ohms at  
Wavelength  
PHONES (stereo mini jack):  
accepts headphones of  
660 nm  
1 kHz, 10% THD)  
Music power output (reference):  
100 + 100 watts (6 ohms at  
1 kHz, 10% THD)  
8 ohms or more  
accepts impedance of  
6 ohms  
SPEAKER:  
Korean and Thai models:  
CMT-DX2D/SX2D  
Disc player section  
System  
Compact disc and digital  
audio and video system  
Semiconductor laser  
(DVD: λ=650 nm,  
The following measured at AC 220 V, 60 Hz  
DIN power output (rated): 35 + 35 watts  
(6 ohms at 1 kHz, DIN)  
Continuous RMS power output (reference):  
45 + 45 watts  
Laser  
CD: λ=790 nm)  
Emission duration:  
continuous  
(6 ohms at 1 kHz, 10%  
THD)  
Frequency response  
DVD (PCM 48 kHz):  
2 Hz – 22 kHz ( 1 dB)  
CD: 2 Hz – 20 kHz ( 1 dB)  
Video color system format  
Pan-American models:  
NTSC  
European and Russian  
models: PAL  
Other models: NTSC, PAL  
continued  
51GB  
 
 
Tape deck section  
Speaker  
Recording system  
Frequency response  
4-track 2-channel stereo  
40 – 13,000 Hz,  
Speaker system  
2-way, bass-reflex type,  
magnetically shielded type  
using Sony TYPE I  
cassette  
0.15% W.Peak (IEC)  
0.1% W.RMS (NAB)  
0.2% W.Peak (DIN)  
Speaker units  
Woofer:  
Tweeter:  
Nominal impedance  
Dimensions (w/h/d)  
12 cm, cone type  
4 cm, cone type  
6 ohms  
Approx. 170 × 250 ×  
220 mm  
Wow and flutter  
Tuner section  
FM stereo, FM/AM superheterodyne tuner  
Mass  
Approx. 3.0 kg net per  
speaker  
FM tuner section  
Tuning range  
General  
Power requirements  
87.5 – 108.0 MHz  
(50 kHz step)  
Antenna  
FM lead antenna  
75 ohms unbalanced  
10.7 MHz  
North American model: 120 V AC, 60 Hz  
European and Russian models:  
230 V AC, 50/60 Hz  
Antenna terminals  
Intermediate frequency  
AM tuner section  
Tuning range  
Australian model:  
Korean model:  
Thai model:  
Taiwan model:  
Other models:  
230 – 240 V AC, 50/60 Hz  
220 V AC, 60 Hz  
220 V AC, 50/60 Hz  
120 V AC, 50/60 Hz  
110 – 120 V, 220 – 240 V  
AC, 50/60 Hz  
Pan-American models:  
530 – 1,710 kHz  
(with the tuning interval  
set at 10 kHz)  
531 – 1,710 kHz  
(with the tuning interval  
set at 9 kHz)  
Adjustable with voltage  
selector  
European and Russian models:  
531 – 1,602 kHz  
Power consumption  
North American model: 110 watts  
European and Russian models:  
110 watts  
(with the tuning interval  
set at 9 kHz)  
Other models:  
530 – 1,710 kHz  
(with the tuning interval  
set at 10 kHz)  
531 – 1,602 kHz  
(with the tuning interval  
set at 9 kHz)  
0.3 watts (in Power Saving  
Mode)  
Australian, Korean and Thai models:  
110 watts  
120 watts  
Dimensions (w/h/d) (excl. speakers)  
Other models:  
Antenna  
Antenna terminals  
Intermediate frequency  
AM loop antenna  
External antenna terminal  
450 kHz  
Pan-American, European, Russian, Australian and  
Korean models:  
Other models:  
Approx. 190 × 250 ×  
301 mm  
Approx. 190 × 250 ×  
310 mm  
Mass (excl. speakers)  
Supplied accessories:  
Approx. 5.9 kg  
Remote Commander (1)  
R6 (size AA) batteries (2)  
AM loop antenna (1)  
FM lead antenna (1)  
Video cable (1) (except for  
European and Russian  
models)  
Speaker pads (8)  
Design and specifications are subject to change  
without notice.  
52GB  
 
DVD  
A disc that contains up to 8 hours of moving  
pictures even though its diameter is the same as  
a CD.  
Glossary  
Album  
The data capacity of a single-layer and single-  
sided DVD, at 4.7 GB (Giga Byte), is 7 times  
that of a CD. Furthermore, the data capacity of a  
dual-layer and single-sided DVD is 8.5 GB, a  
single-layer and double-sided DVD 9.4 GB, and  
a dual-layer and double-sided DVD 17 GB.  
The picture data uses the MPEG 2 format, one of  
the worldwide standards of digital compression  
technology. The picture data is compressed to  
about 1/40 of its original size. The DVD also  
uses the variable rate coding technology that  
changes the data to be allocated according to the  
status of the picture.  
Section of a music piece on a data CD  
containing MP3 audio tracks or JPEG image  
files.  
Auto Pause  
An automatical pauses according to the signal  
encoded on the disc while playing a VIDEO CD.  
If the CD/DVD player does not resume play for  
a long time, press H (or DVD NX on the  
unit) to resume play manually.  
Chapter  
Sections of a picture or a music piece on a DVD  
that are smaller than titles. A title is composed of  
several chapters. Each chapter is assigned a  
chapter number enabling you to locate the  
chapter you want.  
The audio data is recorded in Dolby Digital as  
well as in PCM, allowing you to enjoy more  
realistic audio presence.  
Furthermore, various advanced functions such  
as the multi-angle, multilingual, and Parental  
Control functions are provided with the DVD.  
Dolby Digital  
This sound format for movie theaters is more  
advanced than Dolby Surround Pro Logic. In  
this format, the surround speakers output stereo  
sound with an expanded frequency range and a  
subwoofer channel for deep bass is  
independently provided. This format is also  
called “5.1” because the subwoofer channel is  
counted as 0.1 channel (since it functions only  
when a deep bass effect is needed). All six  
channels in this format are recorded separately  
to realize superior channel separation.  
DVD-RW  
A DVD-RW is a recordable and rewritable disc  
that is the same size as a DVD VIDEO. The  
DVD-RW has two different modes: VR mode  
and Video mode. DVD-RWs created in Video  
mode have the same format as a DVD VIDEO,  
while discs created in VR (Video Recording)  
mode allow the contents to be programmed or  
edited.  
Furthermore, since all the signals are processed  
digitally, less signal degradation occurs.  
DVD+RW  
A DVD+RW (plus RW) is a recordable and  
rewritable disc. DVD+RWs use a recording  
format that is comparable to the DVD VIDEO  
format.  
DTS  
Digital audio compression technology that the  
Digital Theater Systems, Inc. developed. This  
technology conforms to 5.1-channel surround.  
The surround channel is stereo and there is  
discrete sub woofer channel in this format. DTS  
provides the same 5.1 discrete channels of high  
quality digital audio. The good channel  
separation is realized because the all channel  
data is recorded discrete and processed in  
digital.  
File  
Section of a picture on a data CD containing  
JPEG image files.  
Film based software, Video based  
software  
DVDs can be classified as Film based or Video  
based software. Film based DVDs contain the  
same images (24 frames per second) that are  
shown at movie theaters. Video based DVDs,  
such as television dramas or sit-coms, displays  
images at 30 frames (or 60 fields) per second.  
continued  
53GB  
 
 
Index (CD) / Video Index (VIDEO CD)  
A number that divides a track into sections to  
easily locate the point you want on a VIDEO CD  
or a CD. Depending on the disc, no indexes may  
be recorded.  
Playback Control (PBC)  
Signals encoded on VIDEO CDs (Version 2.0)  
to control playback. By using menu screens  
recorded on VIDEO CDs with PBC functions,  
you can enjoy playing simple interactive  
programs, programs with search functions, and  
so on.  
This system conforms to Ver. 1.1 and Ver. 2.0 of  
VIDEO CD standards. You can enjoy two kinds  
of playback depending on the disc type.  
Interlace format  
(Interlaced scanning)  
Interlace format shows every other line of an  
image as a single “field” and is the standard  
method for displaying images on television. The  
even number field shows the even numbered  
lines of an image, and the odd numbered field  
shows the odd numbered lines of an image.  
VIDEO CDs without PBC functions  
(Ver. 1.1 discs)  
Enjoy video playback (moving pictures) as well  
as music.  
Menu Playback  
Playback using the menu screens recorded on  
VIDEO CDs with PBC functions. You can enjoy  
simple interactive software using the menu  
playback function.  
VIDEO CDs with PBC functions  
(Ver. 2.0 discs)  
Play interactive software using menu screens  
displayed on the TV screen (PBC Playback), in  
addition to the video playback functions of Ver.  
1.1 discs. Moreover, you can play high-  
resolution still pictures, if they are included on  
the disc.  
Multi-angle function  
Various angles, or viewpoints of the video  
camera, for a scene are recorded on some DVDs.  
Multilingual function  
Several languages for the sound or subtitles in a  
picture are recorded on some DVDs.  
Progressive format  
(sequential scanning)  
In contrast to the Interlace format, the  
Multi Session  
progressive format can reproduce 50 to 60  
frames per second by reproducing all scanning  
lines (525 lines for the NTSC system, 625 lines  
for the PAL system). The overall picture quality  
increases and still images, text, and horizontal  
lines appear sharper. This format is compatible  
with the 525 or 625 progressive format.  
This is a recording method that enables adding  
of data using the Track-At-Once method.  
Conventional CDs begin at a CD control area  
called the Lead-in and end at an area called  
Lead-out. A Multi Session CD is a CD having  
multiple sessions, with each segment from  
Lead-in to Lead-out regarded as a single session.  
CD-Extra: This format records audio (audio CD  
data) on the tracks in session 1 and data on the  
tracks in session 2.  
Region Code  
This system is used to protect copyrights. A  
region number is allocated on each DVD system  
or DVD disc according to the sales region. Each  
region code is shown on the system as well as on  
the disc packaging. The system can play the  
discs that match its region code. The system can  
ALL  
Parental Control  
A function of the DVD to limit playback of the  
disc by the age of the users according to the  
limitation level in each country/region. The  
limitation varies from disc to disc; when it is  
activated, playback is completely prohibited,  
violent scenes are skipped or replaced with other  
scenes and so on.  
also play discs with the “  
” mark. Even when  
the region code is not shown on the DVD, the  
region limit may still be activated.  
54GB  
 
Title  
The longest sections of a picture or a music  
piece on a DVD; a movie, etc., for a picture  
piece on video software; or an album, etc., for a  
music piece on audio software. Each title is  
assigned a title number enabling you to locate  
the title you want.  
Track  
Sections of a picture or a music piece on a CD,  
VIDEO CD, MP3 or JPEG. Each track is  
assigned a track number enabling you to locate  
the track you want.  
Disc  
DVD  
Title  
structure  
Chapter  
Track  
Index  
Album  
Track  
Album  
File  
Disc  
Disc  
Disc  
VIDEO CD  
or CD  
structure  
MP3  
structure  
JPEG  
structure  
VIDEO CD  
A compact disc that contains moving pictures.  
The picture data uses the MPEG 1 format, one of  
the worldwide standards for digital compression  
technology. The picture data is compressed to  
about 1/140 of its original size. Consequently, a  
12 cm VIDEO CD can contain up to 74 minutes  
of moving pictures.  
VIDEO CDs also contain compact audio data.  
Sounds outside the range of human hearing are  
compressed while the sounds we can hear are  
not compressed. VIDEO CDs can hold 6 times  
the audio information of conventional audio  
CDs.  
There are 2 versions of VIDEO CDs.  
• Version 1.1: You can play only moving  
pictures and sounds.  
• Version 2.0: You can play high-resolution  
still pictures and enjoy PBC functions.  
This system conforms to both versions.  
55GB  
 
List of button locations and reference pages  
Illustration number  
How to use this page  
r
Use this page to find the location of buttons and other  
parts of the system that are mentioned in the text.  
TUNER/BAND 7 (28, 29, 32)  
R
R
Name of button/part Reference page  
Main unit  
BUTTON DESCRIPTIONS  
ALPHABETICAL ORDER  
?/1 (on/standby) 1 (11, 48)  
TAPE N (play) 2 (31)  
DVD NX (play/pause) 6 (14,  
A – O  
P – Z  
Cassette compartment qh (31)  
CD SYNC 0 (31)  
Disc tray 5 (14)  
DISPLAY 9 (30, 37, 38, 39)  
Display window 3  
MIC jack* qg (33)  
PHONES jack qk  
PLAY MODE wd (15, 19, 48)  
PRESET EQ ws (33)  
PROGRESSIVE wa (24)  
Remote sensor 4  
TUNER/BAND 7 (28, 29, 32)  
TUNING +/– qs (28, 30)  
TV w; (32, 42)  
Z (open/close) 8 (14)  
z REC PAUSE/START (record)  
qa (31, 34)  
m/M (rewind/fast forward)  
qs (15, 31)  
MIC LEVEL* qf (33)  
./> (go back/forward) qs  
VOLUME control qj (42)  
Z PUSH OPEN/CLOSE (eject)  
qd (31)  
x (stop) ql (12, 15, 24, 29, 31,  
* CMT-SX2D Asian and  
Oceanian models only  
56GB  
 
 
Remote control  
ALPHABETICAL ORDER  
BUTTON DESCRIPTIONS  
A – O  
?/1 (on/standby) 1 (11, 35, 48)  
TV ?/1 1 (40)  
SLOW/SLOW y 8 (15)  
M (fast forward) 9 (15, 31)  
X (pause) 0 (15)  
m (rewind) qa (15, 31)  
M/m/</, qs (13, 15, 22, 42,  
P – Z  
ANGLE 5 (22)  
AUDIO 4 (21, 33)  
PLAY MODE qg (15, 19)  
PRESET + wk (28, 29)  
PRESET – es (28, 29)  
PRESET EQ wf (33)  
REPEAT eg (18)  
SEARCH 3 (20)  
SLEEP qk (35)  
SUBTITLE wd (22)  
TAPE qh (31)  
THEATRE SYNC ql (40)  
TOP MENU qd (16)  
TUNER/BAND wa (28, 29)  
TUNER MEMORY ws (28)  
TUNING + 9 (28, 30)  
TUNING – qa (28, 30)  
TV e; (40)  
TV CH + wk (40)  
TV CH – es (40)  
TV/VIDEO qk (40)  
TV VOL +/–* 7 (40)  
VOLUME +/–* 7 (15, 30, 31,  
35)  
CLEAR ef (19, 20, 25)  
CLOCK/TIMER SELECT w;  
CLOCK/TIMER SET w; (13, 35,  
36)  
DISPLAY wj (13, 22, 42, 48)  
DIMMER ej (37)  
> (forward) wk (13, 15, 31, 35)  
x (stop) wl (12, 15, 24, 31, 32,  
H (play)* ea (14, 31, 43)  
. (go back) es (13, 15, 31, 35)  
O RETURN ed (17)  
-/-- ef  
DISPLAY qj (30, 37, 38, 39)  
DVD eh (12, 13, 14, 17, 19, 24,  
ENTER qs wg(13, 16, 17, 19, 20,  
FM MODE eg (30)  
FUNCTION +/– 2 (12, 13, 14,  
MENU 6 (16, 17)  
MUTING wh (15, 30, 31)  
Number buttons* qf (16, 17, 19,  
* The H, number 5 and  
VOLUME + (TV VOL +)  
buttons have tactile dots. Use  
the tactile dots as references  
when operating the system.  
57GB  
 
58GB  
 
59GB  
 
Sony Corporation Printed in China  
 

Shark Electric Steamer SC630WC User Manual
Sole Control Remotes Treadmill TT8 User Manual
Sony Camcorder Accessories SPK TRV7 User Manual
Sony VCR 1500A User Manual
Soundstream Technologies Stereo Amplifier SA120 User Manual
Speco Technologies Security Camera HT 8WMTDV Series User Manual
Spectra Fitness Electronics TP 10 User Manual
Sphereteq GPS Receiver P 3600 User Manual
SUPER MICRO Computer Home Theater Server 6012L 6 User Manual
SysKonnect Network Card SK 9E21D User Manual