Asus Car Video System MX279 User Manual

MX279  
LCD Monitor  
User Guide  
 
Table of contents  
Notices......................................................................................................... iv  
Safety information ....................................................................................... v  
Care & Cleaning.......................................................................................... vi  
Takeback Services..................................................................................... vii  
1.1  
1.2  
1.3  
Welcome! ...................................................................................... 1-1  
Package contents......................................................................... 1-1  
Monitor introduction.................................................................... 1-2  
1.3.1  
1.3.2  
1.3.3  
Front view ....................................................................... 1-2  
Back view........................................................................ 1-4  
QuickFit Function............................................................ 1-5  
2.1  
Assembling the monitor base..................................................... 2-1  
2.1.1  
2.1.2  
Assembling the base....................................................... 2-1  
Detaching the base......................................................... 2-2  
2.2  
2.3  
2.4  
3.1  
Adjusting the monitor.................................................................. 2-3  
Connecting the cables................................................................. 2-3  
Turning on the monitor................................................................ 2-4  
OSD (On-Screen Display) menu ................................................. 3-1  
3.1.1  
How to reconfigure.......................................................... 3-1  
3.1.2  
OSD Function Introduction.............................................. 3-1  
3.2  
3.3  
3.4  
Specifications Summary ............................................................. 3-4  
Troubleshooting (FAQ)................................................................ 3-6  
Supported operating modes ....................................................... 3-7  
iii  
 
Notices  
Federal Communications Commission Statement  
This device complies with Part 15 of the FCC Rules. Operation is subject  
to the following two conditions:  
This device may not cause harmful interference, and  
This device must accept any interference received including  
interference that may cause undesired operation.  
This equipment has been tested and found to comply with the limits for a  
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits  
are designed to provide reasonable protection against harmful interference  
in a residential installation. This equipment generates, uses and can  
radiate radio frequency energy and, if not installed and used in accordance  
with manufacturer’s instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will  
not occur in a particular installation. If this equipment does cause harmful  
interference to radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to try to correct  
the interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment to an outlet on a circuit different from that to  
which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
This product implements power management functionality. In case of no  
signal input after 10 seconds, the product automatically goes to sleep/  
standby mode.  
As an Energy Star® Partner, our company has determined  
that this product meets the Energy Star® guidelines for  
energy efficiency.  
Canadian Department of Communications Statement  
This digital apparatus does not exceed the Class B limits for radio  
noise emissions from digital apparatus set out in the Radio Interference  
Regulations of the Canadian Department of Communications.  
This class B digital apparatus complies with Canadian ICES-003.  
iv  
 
Safety information  
Before setting up the monitor, carefully read all the documentation that  
came with the package.  
To prevent fire or shock hazard, never expose the monitor to rain or  
moisture.  
Never try to open the monitor cabinet. The dangerous high voltages  
inside the monitor may result in serious physical injury.  
If the power supply is broken, do not try to fix it by yourself. Contact a  
qualified service technician or your retailer.  
Before using the product, make sure all cables are correctly connected  
and the power cables are not damaged. If you detect any damage,  
contact your dealer immediately.  
Slots and openings on the back or top of the cabinet are provided for  
ventilation. Do not block these slots. Never place this product near or  
over a radiator or heat source unless proper ventilation is provided.  
The monitor should be operated only from the type of power source  
indicated on the label. If you are not sure of the type of power supply to  
your home, consult your dealer or local power company.  
Use the appropriate power plug which complies with your local power  
standard.  
Do not overload power strips and extention cords. Overloading can  
result in fire or electric shock.  
Avoid dust, humidity, and temperature extremes. Do not place the  
monitor in any area where it may become wet. Place the monitor on a  
stable surface.  
Unplug the unit during a lightning storm or if it will not be used for a  
long period of time. This will protect the monitor from damage due to  
power surges.  
Never push objects or spill liquid of any kind into the slots on the  
monitor cabinet.  
To ensure satisfactory operation, use the monitor only with UL listed  
computers which have appropriate configured receptacles marked  
between 100-240V AC.  
If you encounter technical problems with the monitor, contact a  
qualified service technician or your retailer.  
v
 
Care & Cleaning  
Before you lift or reposition your monitor, it is better to disconnect the  
cables and power cord. Follow the correct lifting techniques when  
positioning the monitor. When lifting or carrying the monitor, grasp the  
edges of the monitor. Do not lift the display by the stand or the cord.  
Cleaning. Turn your monitor off and unplug the power cord. Clean the  
monitor surface with a lint-free, non-abrasive cloth. Stubborn stains  
may be removed with a cloth dampened with mild cleaner.  
Avoid using a cleaner containing alcohol or acetone. Use a cleaner  
intended for use with the LCD. Never spray cleaner directly on the  
screen, as it may drip inside the monitor and cause an electric shock.  
The following symptoms are normal with the monitor:  
The screen may flicker during the initial use due to the nature of the  
fluorescent light. Turn off the Power Switch and turn it on again to  
make sure that the flicker disappears.  
You may find slightly uneven brightness on the screen depending on  
the desktop pattern you use.  
When the same image is displayed for hours, an afterimage of the  
previous screen may remain after switching the image. The screen will  
recover slowly or you can turn off the Power Switch for hours.  
When the screen becomes black or flashes, or cannot work anymore,  
contact your dealer or service center to fix it. Do not repair the screen  
by yourself!  
Conventions used in this guide  
WARNING: Information to prevent injury to yourself when trying  
to complete a task.  
CAUTION: Information to prevent damage to the components  
when trying to complete a task.  
IMPORTANT: Information that you MUST follow to complete a  
task.  
NOTE: Tips and additional information to aid in completing a task.  
vi  
 
Where to find more information  
Refer to the following sources for additional information and for product  
and software updates.  
1. ASUS websites  
The ASUS websites worldwide provide updated information on ASUS  
hardware and software products. Refer to http://www.asus.com  
2. Optional documentation  
Your product package may include optional documentation that may  
have been added by your dealer. These documents are not part of  
the standard package.  
Takeback Services  
ASUS recycling and takeback programs come from our commitment to the  
highest standards for protecting our environment. We believe in providing  
solutions for our customers to be able to responsibly recycle our products,  
batteries and other components as well as the packaging materials.  
Please go to http://csr.asus.com/english/Takeback.htm for detail recycling  
information in different region.  
vii  
 
1.1  
Welcome!  
Thank you for purchasing the ASUS® LCD monitor!  
The latest widescreen LCD monitor from ASUS provides a crisper,  
broader, and brighter display, plus a host of features that enhance your  
viewing experience.  
With these features, you can enjoy the convenience and delightful visual  
experience that the monitor brings to you!  
1.2 Package contents  
Check your package for the following items:  
LCD monitor  
1 x Adapter  
1 x Power cable  
1 x VGA cable  
1 x DVI-HDMI cable  
1 x Audio cable  
1 x Quick start guide  
1 x Warranty card  
If any of the above items is damaged or missing, contact your retailer  
immediately.  
CAUTION  
ASUS LCD Monitor MX279  
1-1  
 
1.3  
Monitor introduction  
1.3.1  
Front view  
4
6
7
1.  
Button:  
Activates the QuickFit function. (Please refer to 1.3.3 QuickFit  
function).  
2.  
Button:  
Press this hotkey to switch from six video preset modes  
(Scenery Mode, Standard Mode, Theater Mode, Game  
Mode, Night View Mode, and sRGB) with SPLENDID™ Video  
Intelligence Technology.  
Exit the OSD menu or go back to the previous menu as the OSD  
menu is active.  
Automatically adjusts the image to its optimized position, clock,  
and phase by pressing this button for 2~4 seconds (for VGA  
mode only).  
3.  
Button:  
Decreases values or moves your selection left/down.  
Volume hotkey  
4. MENU Button:  
Turns on the OSD menu.  
Enacts the selected OSD menu item.  
5.  
6.  
Button:  
Increases values or moves your selection right/up.  
Brightness hotkey  
Input Select Button:  
Selects an available input source.  
Chapter 1: Product Introduction  
1-2  
 
Press  
(Input Select button) to display HDMI signals after you connect  
HDMI cable with the monitor.  
7.  
Power Button/Power Indicator:  
Press this button to turn the monitor on/off.  
The color definition of the power indicator is as the table below.  
Status  
White  
Amber  
OFF  
Description  
ON  
Standby mode  
OFF  
ASUS LCD Monitor MX279  
1-3  
 
1.3.2  
Back view  
HDMI-1  
HDMI-2  
VGA  
HDMI-1  
HDMI-2  
VGA  
4
6
1. HDMI port: This port is for connection with an HDMI compatible  
device.  
2. VGA port: This 15-pin port is for PC VGA connection.  
3. Audio-in port: This port connects PC audio source by the bundled  
audio cable.  
4. Earphone jack: This port connects to an earphone.  
5. DC-in port: This port connects the adapter.  
6. Kensington Lock: This port connects a lock-and-cable apparatus for  
security purposes.  
Chapter 1: Product Introduction  
1-4  
 
1.3.3  
QuickFit Function  
The QuickFit function allows users to have a preview of the document or  
photo layout directly on screen without printing test copies.  
QuickFit has three patterns:  
a. Grid pattern: Facilitates designers and users to organize content  
and layout on one page and achieve a consistent look and feel.  
Alignment Grid  
QuickFit  
b. Paper size: Provides users to view their documents in real size  
on the screen.  
A4  
Letter  
QuickFit  
QuickFit  
c. Photo size: Provides photographers and other users to  
accurately view and edit their photos in real size on the screen.  
4x6  
3x5  
2x2  
8x10  
5x7  
QuickFit  
QuickFit  
To activate QuickFit, press the QuickFit hotkey repeatedly to switch  
between different pattern sizes.  
When QuickFit is activated, press the control buttons to make adjustments.  
The QuickFit OSD displayed in the lower right corner of the screen will  
guide users to make selections.  
QuickFit  
ASUS LCD Monitor MX279  
1-5  
 
2.1  
Assembling the monitor base  
2.1.1 Assembling the base  
1. Have the front of the monitor face down on a table.  
2. Attach the base to the arm and fix with the screw to join them tightly.  
You can easily tighten the screw by fingers.  
3. Adjust the monitor to the angle that is most comfortable for you.  
We recommend that you cover the table surface with soft cloth to  
prevent damage to the monitor.  
Chapter 2: Setup  
2-1  
 
2.1.2 Detaching the base  
1. Disconnect power and signal cables. Carefully put the front of the  
monitor face down on a clean table.  
2. Use your fingers to loosen the screw located at the bottom of the  
base, and remove the base from the stand.  
3. Or, you may directly use a screwdriver to remove the screw that  
secures the base to the stand, and detach the base from the stand.  
We recommend that you cover the table surface with soft cloth to  
prevent damage to the monitor.  
Hold the base while removing the screw.  
ASUS LCD Monitor MX279  
2-2  
 
2.2  
Adjusting the monitor  
For optimal viewing, we recommend that you look at the full face of the  
monitor, then adjust the monitor to the angle that is most comfortable  
for you.  
Hold the stand to prevent the monitor from falling while changing its  
angle.  
You can adjust the monitor’s angle from -5˚ to 20˚.  
-5 to +20  
It is normal that the monitor slightly shakes while you adjust the viewing angle.  
2.3  
Connecting the cables  
Connect the cables according to the following instructions:  
HDMI-1  
HDMI-2  
VGA  
HDMI-1  
HDMI-2  
VGA  
Audio-in  
DC-IN  
HDMI  
VGA Earphone jack  
To connect the audio cable: connect one end of the audio cable to  
the monitor’s Audio-in port, the other end to the computer’s audio-out  
port.  
Chapter 2: Setup  
2-3  
 
To connect the power cord:  
a. Connect the adapter to the monitor's DC input.  
b. Connect one end of the power cable to the adapter, and the other  
end to a power outlet.  
To connect the VGA/HDMI cable:  
a. Plug one end of the VGA/HDMI cable to the monitor's VGA/HDMI  
port.  
b. Connect the other end of the VGA/HDMI cable to your computer's  
VGA/HDMI port.  
c. Tighten the two screws to secure the VGA connector.  
To use the earphone:  
a. When an HDMI cable is connected, connect the end with plug  
type to the monitor’s earphone jack.  
b. When VGA and Audio-in-line is connected, connect the end with  
plug type to the monitor's earphone jack.  
When multiple video cable signals are connected, you can choose the desired  
input by pressing the  
in the OSD menu.  
Input Select key or select from the Input Select item  
2.4  
Turning on the monitor  
Press the power button  
. See page 1-2 for the location of the power  
lights up in white to show that the monitor  
button. The power indicator  
is ON.  
ASUS LCD Monitor MX279  
2-4  
 
3.1  
OSD (On-Screen Display) menu  
3.1.1  
How to reconfigure  
MX279  
1. Press the MENU button  
to activate the OSD menu.  
Splendid  
Color  
Scenery Mode  
Standard Mode  
Theater Mode  
Game Mode  
Image  
2. Press  
and  
to navigate  
Input Select  
System Setup  
Night View Mode  
sRGB  
through the functions. Highlight  
and activate the desired function  
by pressing the MENU button. If  
the function selected has a  
Move  
Menu  
Exit  
sub-menu, press  
and  
again to navigate through the  
sub-menu functions. Highlight and activate the desired sub-menu  
function by pressing the MENU button.  
3. Press  
and  
to change the settings of the selected function.  
4. To exit the OSD menu, press the  
to adjust any other function.  
button. Repeat step 2 and step 3  
3.1.2  
OSD Function Introduction  
1. lSplendid  
MX279  
Splendid  
Color  
Scenery Mode  
Standard Mode  
Theater Mode  
Game Mode  
This function contains six sub-  
functions that you can select for  
your preference. Each mode has  
the Reset selection, allowing you  
to maintain your setting or return  
to the preset mode.  
Image  
Input Select  
System Setup  
Night View Mode  
sRGB  
Move  
Menu  
Exit  
Scenery Mode: best choice for scenery photo display with  
SPLENDID™ Video Enhancement.  
Standard Mode: best choice for document editing with  
SPLENDID™ Video Enhancement.  
Theater Mode: best choice for movies with SPLENDID™ Video  
Enhancement.  
Game Mode: best choice for games playing with SPLENDID™  
Video Enhancement.  
Night View Mode: best choice for dark-scene games or movies  
with SPLENDID™ Video Enhancement.  
sRGB: best choice for viewing photos and graphics from PCs.  
In the Standard Mode, the Saturation, Skin Tone, Sharpness, and  
ASCR functions are not user-configurable.  
In the sRGB, the Brightness, Contrast, Saturation, Color  
Temp., Skin Tone, Sharpness, and ASCR functions are not user-  
configurable.  
Chapter 3: General Instruction  
3-1  
 
2. Color  
You can adjust Brightness, Contrast,  
MX279  
Splendid  
Color  
Brightness  
Contrast  
100  
80  
Saturation, Color Temp., and Skin  
Tone from this menu.  
Image  
Saturation  
Color Temp.  
50  
Input Select  
System Setup  
User Mode  
Skin Tone  
Natural  
Brightness: the adjusting  
range is from 0 to 100.  
button is a hotkey to activate  
this function.  
Move  
Menu  
Exit  
Contrast: the adjusting range is from 0 to 100.  
Saturation: the adjusting range is from 0 to 100.  
Color Temp.: contains four modes including Cool, Normal,  
Warm and User Mode.  
Skin Tone: contains three color modes including Reddish,  
Natural, and Yellowish.  
In the User Mode, colors of R (Red), G (Green), and B (Blue) are  
user-configurable; the adjusting range is from 0 ~ 100.  
3. Image  
You can adjust Sharpness, Trace  
MX279  
Splendid  
Color  
Sharpness  
Trace Free  
Aspect Control  
ASCR  
60  
60  
Free, Aspect Control, ASCR,  
Position (VGA only), and Focus  
(VGA only) from this menu.  
Image  
Full  
OFF  
Input Select  
System Setup  
Position  
Focus  
Sharpness: the adjusting  
range is from 0 to 100.  
Move  
Menu  
Exit  
Trace Free: adjusts the response time of the monitor. The  
adjusting range is from 0 to 100.  
Aspect Control: adjusts the aspect ratio to “Full”, “4:3”, or “Over  
Scan” (only available for HDMI input.)  
ASCR: turns on/off the ASCR (ASUS Smart Contrast Ratio)  
function (only available in Scenery Mode, Theater Mode, Game  
Mode, and Night View Mode)  
Position: adjusts the horizontal postition (H-Position) and the  
vertical position (V-Position) of the image. The adjusting range is  
from 0 to 100 (only available for VGA input).  
Focus: reduces the Horizonal-line noise and Vertical-line noise  
of the image by adjusting (Phase) and (Clock) separately. The  
adjusting range is from 0 to 100.  
ASUS LCD Monitor MX279  
3-2  
 
Phase adjusts the phase of the pixel clock signal. With a wrong phase  
adjustment, the screen shows horizontal distrubances.  
Clock (pixel frequency) controls the number of pixels scanned by one  
horizontal sweep. If the frequency is not correct, the screen shows vertical  
stripes and the image i not proportional.  
Input Select  
MX279  
In this menu, you can select your  
Splendid  
Color  
VGA  
desired input source: VGA,  
HDMI1 or HDMI2 (only available  
in Scenery Mode, Theater Mode,  
Game Mode, and Night View  
Mode)  
HDMI1  
HDMI2  
Image  
Input Select  
System Setup  
Move  
Menu  
Exit  
4. System Setup  
Allows you to adjust the system.  
MX279  
Splendid  
Color  
Splendid Demo Mode  
Volume  
OFF  
70  
Splendid Demo Mode:  
Image  
ECO Mode  
OFF  
splits the screen into two for  
Splendid mode comparison  
(only available in Scenery  
Mode, Theater Mode, Game  
Mode, and Night View Mode).  
Input Select  
System Setup  
OSD Setup  
Language  
English  
Information  
1/2  
Move  
Menu  
Exit  
Volume: Adjust the  
earphone output volume level. The adjusting range  
is from 0 to 100.  
ECO Mode: Activate the ecology mode for power saving. (Some  
gray levels may not be distinguished if ECO is ON. Its brightness  
is lower than that when setting the Contrast Ratio to 100.)  
OSD Setup: Adjust the horizontal postition (H-Position), vertical  
position (V-Position), OSD Timeout, DDD/CI, and Transparency  
of the OSD screen.  
Language: Select OSD language. The selections are English,  
French, German, Spanish, Italian, Dutch, Russian, Traditional  
Chinese, Simplified Chinese, and Japanese.  
Information: Display the monitor information of Input Port,  
Resolution, H-freq., V-freq, and Model Name.  
All Reset: Set to “Yes” to revert all settings to the factory default  
status.  
Chapter 3: General Instruction  
3-3  
 
3.2  
Specifications Summary  
Panel Type  
Panel Size  
TFT LCD  
27” (16:9, 68.6 cm) wide screen  
Max. Resolution  
1920 x 1080  
250 cd/m2  
1000:1  
Brightness (Typ.)  
Contrast Ratio (Typ.)  
ASUS Smart Contrast Ration  
(ASCR)  
≥ 80,000,000:1 (with ASCR on)  
Color Saturation (NTSC)  
Viewing Angle (H/V) CR>10  
Display Colors  
72 % (Typ)  
178° (H) / 178° (V)  
16.7 M  
Response Time  
5 ms (Gray to Gray)  
Pixel Pitch  
0.3114 (H) mm x 0.3114 (V) mm  
Full HD  
1080P  
Yes  
Trace Free Technology  
SPLENDIDTM Video Enhancement Yes  
SPLENDIDTM selection  
Auto adjustment  
6 video preset modes (by hotkey)  
Yes (by hotkey)  
Color temperature selection  
Skin-Tone selection  
Digital input  
4 color temperatures  
3 skin tones  
HDMI v1.3 (x2)  
Analog input  
D-Sub  
Audio-in port  
3.5 mm Mini-jack  
Earphone jack  
Yes (only for HDMI)  
Kensington Lock Slot  
Auto Adjustment Hotkey  
Brightness Adjustment Hotkey  
Volume Adjustment Hotkey  
Input Selection Hotkey  
Colors  
Yes  
Yes  
Yes  
Yes  
Yes  
Black  
Speaker (Built-in)  
Power LED  
2 x 3 W  
White (On) / Amber (Standby)  
-5° ~ +20°  
Tilt  
ASUS LCD Monitor MX279  
3-4  
 
AC 100~240Vac, 50/60Hz  
Voltage Rating  
(AC adaptor: ENERTRONIX-EXA1203YH /  
Delta-ADP-65GD B)  
Power On: 37W (max), Standby: < 0.5 W (AC110V) /  
0.55 W (AC220V), Power Off: < 0.5 W (AC110V) / <  
0.55 W (AC220V)  
Power Consumption  
Temperature (Operating)  
0 ~ 40° C  
Temperature (Non-operating)  
-30 ~ 65° C  
441.3 x 622.6 x 225.2 mm (monitor)  
537.0 x 700.0 x 114.0 mm (package)  
5.2 ± 1.0 kg (Net), 8.0 ± 1.0 kg (Gross)  
Dimensions (W x H x D)  
Weight (Esti.)  
21 languages (English, French, German, Spanish,  
Italian, Dutch, Russian, Poland, Czech, Croatia,  
Hungary, Romania, Portuguese, Turkey, Traditional  
Chinese, Simplified Chinese, Japanese, Korean  
Persian, Thai, Indonesian)  
Multi-languages  
Accessories  
Adapter, Power cable, VGA cable, DVI-HDMI cable,  
Audio cable, Quick Start Guide, Warranty card  
UL/cUL, CB, CE, FCC, CCC, BSMI, Gost-R, c-Tick,  
VCCI, Windows Vista & 7 WHQL, EuP, RoHS, WEEE,  
EPEAT, HDMI, Energy Star® 5.1, China Energy Label,  
J-Moss  
Regulation approvals  
*Adaptor has PSE Regulation approvals.  
*Specifications subject to change without notice.  
Chapter 3: General Instruction  
3-5  
 
3.3  
Troubleshooting (FAQ)  
Problem  
Possible Solution  
button to check if the monitor is in the  
Power LED is not ON  
Press the  
ON mode.  
Check if the adapter and power cable are properly  
connected to the monitor and the power outlet.  
The power LED lights amber and  
there is no screen image  
Check if the monitor and the computer are in the  
ON mode.  
Make sure the signal cable is properly connected  
the monitor and the computer.  
Inspect the signal cable and make sure none of the  
pins are bent.  
Connect the computer with another available  
monitor to check if the computer is properly working.  
Screen image is too light or dark  
Adjust the Contrast and Brightness settings via  
OSD.  
Screen image is not centered or  
sized properly  
Press the  
button for two seconds to  
automatically adjust the image.  
Adjust the H-Position or V-Position settings via  
OSD.  
Screen image bounces or a wave  
pattern is present in the image  
Make sure the signal cable is properly connected to  
the monitor and the computer.  
Move electrical devices that may cause electrical  
interference.  
Screen image has color defects  
(white does not look white)  
Inspect the signal cable and make sure that none of  
the pins are bent.  
Perform Reset via OSD.  
Adjust the R/G/B color settings or select the Color  
Temperature via OSD.  
Screen image is blurry or fuzzy  
No sound or sound is low  
Press the  
button for two seconds to  
automatically adjust the image (for VGA mode only).  
Adjust the Phase and Clock settings via OSD.  
Make sure the audio cable is properly connected to  
the monitor.  
Adjust the volume settings of both your monitor and  
computer.  
Make sure the computer sound card driver is  
properly installed and activated.  
ASUS LCD Monitor MX279  
3-6  
 
3.4  
Supported operating modes  
Horizontal  
Refresh Rate Frequency  
(KHz)  
Vertical  
Frequency  
(Hz)  
Mode  
Resolution  
Pixel (MHz)  
DOS  
VGA  
720x400@70Hz  
640x480@60Hz  
640x480@72Hz  
640x480@75Hz  
800x600@56Hz  
800x600@60Hz  
800x600@72Hz  
800x600@75Hz  
1024x768@60Hz  
1024x768@70Hz  
1024x768@75Hz  
1152x864@75Hz  
1280x1024@60Hz  
1280x1024@75Hz  
1280x960@60Hz  
1280x800@60Hz  
1280x720@60Hz  
1280x768@60Hz  
900x449  
800 x 525  
832 x 520  
840x500  
31.469  
31.469  
37.861  
37.500  
35.156  
37.879  
48.077  
46.875  
48.363  
56.476  
60.023  
67.5  
70.087  
59.940  
72.809  
75.000  
56.250  
60.317  
72.188  
75.000  
60.004  
70.069  
75.029  
75.000  
60.020  
75.025  
60.000  
59.810  
60.000  
59.870  
28.322  
25.175  
31.500  
31.500  
36.000  
40.000  
50.000  
49.500  
65.000  
75.000  
78.750  
108.00  
108.000  
135.00  
108.00  
83.500  
74.25  
1024 x 625  
1056 x 628  
1040 x 666  
1056 x 625  
1344x806  
1328x806  
1312x800  
1600x900  
1688x1066  
1688x1066  
1800x1000  
1680x831  
1650x750  
1664x798  
SVGA  
XGA  
VESA  
SXGA  
63.981  
79.976  
60.000  
49.702  
45.00  
47.776  
79.5  
WXGA  
1360x768@60Hz  
1792x795  
47.712  
60.015  
85.500  
1366x768@60Hz  
1440x900@60Hz  
1600x1200@60Hz  
1792x798  
1904x934  
2160x1250  
2240*1089  
2576x1120  
2200x1125  
2080x1111  
864x525  
47.712  
55.935  
75.000  
65.290  
67.158  
67.500  
66.587  
35  
59.790  
59.887  
60.000  
59.954  
59.963  
60.000  
59.934  
66.66  
85.500  
106.500  
162.000  
146.250  
173.000  
148.500  
138.500  
30.24  
WXGA+  
UXGA  
WSXGA+ 1680x1050@60Hz  
1920x1080@60Hz  
WUXGA 1920x1080@60Hz  
1920x1080@60Hz  
MAC  
832x624@75Hz  
SVGA  
1152x667  
49.714  
74.533  
57.27  
* Modes not listed in the table may not be supported. For optimal resolution, we recommend that  
you choose a mode listed in the table above.  
* This monitor supports full HD (480p, 576p, 720p, 1080i/p) video content from game consoles, DVD  
players and other consumer video devices via HDMI.  
Chapter 3: General Instruction  
3-7  
 

Acoustic Energy Speaker Aego T User Manual
ADTRAN Switch HTU C M User Manual
Agilent Technologies Turntable 5964 8134 User Manual
Amana Furnace DH User Manual
Asoka Network Card PlugLink User Manual
Avital Universal Remote 5303 User Manual
Axis Communications PDAs Smartphones AXIS P3365V User Manual
Axis Communications Security Camera P3304 User Manual
Axor Plumbing Product 14801XX1 User Manual
Behringer Music Pedal BOD400 User Manual