Color Bars: After running through the weight tracking sequence, the scale now
moves through the body analysis. For each of the body analysis measurements,
the scale interprets the measurement result, based on the user’s age and gender.
A green bar means the measurement result is on target, a yellow bar indicates a
result slightly lower or higher than normal, and a red bar indicates a measurement
result that is very high or very low. See body analysis table
Use of Scale for Weight Tracking
and Body Analysis
Use of Scale for Weight Tracking Only
Use Of Scale For Body Analysis Only
LIMITED TEN YEAR WARRANTY
Press USER button once (for user 1) or several times
(for users 2, 3 or 4) to select your user number.
1. Tap the scale with your foot to turn it on.
2. Wait until all digits light up and “0.0” appears.
3. Press USER button once (for user 1) or several times (for users 2, 3 or 4) to select your user
number. The scale will recall the programmed data (user number, height, age, gender) for a few
seconds. Press the down arrow before the scale displays “0.0”, then wait for the “0.0” display.
Conair will repair or replace, at our option, your appliance free of charge for 120
months from the date of purchase if the appliance is defective in workmanship
or materials.
1. Tap the scale with your foot to turn it on. Wait until all
digits light and “0.0” appears.
for more details.
To obtain service under this warranty, return the defective product to the service
center listed below that is nearest you, together with your sales slip and $5.00 for
postage and handling. California residents need only provide proof of purchase
and should call 1-800-3-CONAIR for shipping instructions. In the absence of a
receipt, the warranty period shall be 120 months from the date of manufacture.
2. Press USER (use up and down arrows to get the correct
number) to select your user number among the 4 user
numbers and recall the programmed data.
Current Weight: When the scale displays “0.0”, step on
the scale. Your current weight will display for 3 seconds.
BODY FAT weight displays for 3 seconds, indicated
by a white bar lighting up on the LCD in the “Body Fat
Weight” segment.
ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT
LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE 120-MONTH
DURATION OF THIS WARRANTY. Some states do not allow limitations on how
long an implied warranty lasts, so the above limitations may not apply to you.
Your user data appears ( User number displays for
2 seconds, Height displays for 2 seconds and Age for
2 seconds ) then the scale displays “0.0”.
Then BODY FAT percentage displays for 3 seconds,
indicated by a white bar lighting up on the LCD in the
“Body Fat %” segment.
Change from LAST: Then the difference between your
current and your last weight displays for 3 seconds.
4. When the scale displays "0.0", step on the scale.
Your CURRENT WEIGHT will display for 3 seconds.
IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY,
EXPRESS OR IMPLIED, WHATSOEVER. Some states do not allow the exclusion
or limitation of special, incidental, or consequential damages, so the above
limitation may not apply to you. This warranty gives you specific legal rights,
and you may also have other rights which vary from state to state.
Scales by
™
Then BODY MASS INDEX (BMI) displays for
3 seconds, indicated by a white bar lighting up on the
LCD in the “BMI” segment.
Change from START: Then the difference between your
current weight and your start weight displays for 3 seconds.
3. Step on the scale BAREFOOT, ensuring your feet are
on the silver inserts on the scale surface.
Then your BODY FAT weight displays for 3 seconds.
Current Weight: Your current weight displays
Instructions
for 3 seconds.
Then BODY WATER displays for 3 seconds, indicated
by a white bar lighting up on the LCD in the
“Body Water” segment.
for use of
Weight from GOAL: Then the difference between your
current weight and your goal weight displays for 3 seconds.
Then your BODY FAT percentage displays for
3 seconds.
Change from LAST: Then the difference between your
current and your last weight displays for 3 seconds
(user has lost 5 lbs since the last weighing), indicated by
a white bar lighting up on the LCD in the “Change from
LAST” segment.
Weight Watchers
bathroom scale
Finally, BONE MASS displays for 3 seconds, indicated
by a white bar lighting up on the LCD in the
“Bone Mass” segment.
Then your BODY MASS INDEX (BMI) displays
for 3 seconds.
Change from START: Then the difference between your
current weight and your start weight displays for 3 seconds
(user has lost 10 lbs since start of weight program),
indicated by a white bar lighting up on the LCD in the
“Change from START” segment.
4. Scale turns off automatically.
Then your BODY WATER percentage displays for
3 seconds.
Service Centers
Congratulations! By purchasing this Weight Watchers Scale, you’ve made
the first step toward taking control of your weight. To get the greatest benefit
from your purchase, please read this entire brochure before using your scale.
Conair Corporation
Conair Corporation
Service Department
150 Milford Road
Service Department
7475 N. Glen Harbor Blvd.
Glendale, AZ 85307
1-800-326-6247
East Windsor, NJ 08520
Weight from GOAL: Then the difference between your
current weight and your goal weight displays for 3 seconds
(user needs to lose 10 lbs to reach goal weight), indicated
by a white bar lighting up on the LCD in the “Weight from
GOAL” segment.
And finally your BONE MASS percentage displays
for 3 seconds.
©2006 Conair Corporation. East Windsor, NJ 08520, Glendale, AZ 85307. Made in China.
©2006 Weight Watchers International Inc. All rights reserved. Weight Watchers is the
registered trademark of Weight Watchers International Inc. and used under license.
Models #WW89T, WW89W
IB-6914B
06AD15072
5. Scale turns off automatically.
|