Ecom Instruments PDAs Smartphones iroc x20 Ex User Manual

Communication  
Torches/Flashlights  
Mobile Computing  
Measuring & Calibration  
Mobile solutions for extreme tasks  
Getting Started  
i.roc x20 (-Ex)  
Pocket PC  
 
Power On  
3
4
Press the Power button to turn the unit on.  
Set up the device  
When the Windows Mobile screen displays on the screen tap  
anywhere on the screen and follow the on-screen instructions until  
setup is complete.  
Insert the Companion CD into the computer  
Insert the Companion CD into the computer‘s CD Rom drive.  
Click “Start Here“. Follow the on-screen instructions. The setup wizard  
installs following:  
5
- Active Sync 4.x or higher  
- Microsoft Outlook (if necessary)  
- Other optional software applications  
Connect the i.roc x20 Pocket PC to your computer when instructed by setup  
wizard on the computer  
Therefore connect the USB connection cable to a free USB port on  
your computer, insert the i.roc x20 into docking  
station or connect the USB cable to USB  
6
7
connection set.  
Establish a partnership  
Follow the on-screen Active Sync instructions to establish a connection  
between you Pocket PC and your computer or select guest partnership.  
Use of HP original documents  
The ecom instruments i.roc x20 Pocket PC is based on the HP iPAQ hx2000 Pocket  
PC family. Therefore all related HP documents or Software updates can be used  
further on. All modifications regarding the hardware are descripted within these  
booklet as good as possible. The use of standard software is equal to the original  
HP devices.  
 
Resetting the unit  
Depending on the i.roc x20 operating system, different resets can be performed.  
All resets should be performed without connected and powered charger.  
Windows Mobile 2003 SE  
Performing a Soft-Reset  
A Soft-Reset stops all running applications, but does not erase any programs or saved  
data. Be sure to save any unsaved data with a running application before  
performing a Soft-Reset.  
- To perform a Soft-Reset press both reset buttons on the keypad  
- The Pocket PC restarts and displays the today screen  
Performing a Hard-Reset  
Perform a Hard-Reset only when you want to clear all user-installed settings, applications,  
and data from RAM, where data and applications you have loaded are stored. Also after  
the battery is completely discharged, the device will operate in the same way after Hard-  
Reset. All i.roc x20 are equipped with a so called AutoInstallation tool, you can reload  
predefined programs and settings automatically.  
- To perform a Hard-Reset press and hold down the F1 and F4 buttons  
- While holding down these buttons, press the reset buttons for about two seconds  
- When the Pocket PC screen begins to fade, release the F1 and F4 buttons first  
and then release the reset buttons.  
- The Pocket PC resets and powers on  
Note: If you simultaneously push and hold the Reset, F1 and F4 buttons for more than two  
seconds, the battery disconnects. To restart the device, either plug the device into the AC  
Adapter or press the reset buttons again.  
Windows Mobile 5  
Performing a Soft-Reset  
A Soft-Reset stops all running applications, but does not erase any programs or saved  
data. Be sure to save any unsaved data with a running application before  
performing a Soft-Reset.  
- To perform a Soft-Reset press both reset buttons on the keypad  
- The Pocket PC restarts and displays the today screen  
Performing a Hard-Reset  
A Hard Reset stops all running applications, but does not erase any programs or saved  
data. Additional to a soft reset all hardware registers will be erased.  
- To perform a Hard-Reset press and hold down the F1 and F4 buttons  
- While holding down these buttons, press the reset buttons for about two seconds  
- When the Pocket PC screen begins to fade, release the F1 and F4 buttons first  
and then release the reset buttons.  
- The Pocket PC resets and powers on  
Note: If you simultaneously push and hold the Reset, F1 and F4 buttons for more than two  
seconds, the battery disconnects. To restart the device, either plug the device into the AC  
Adapter or press the reset buttons again.  
Performing a Clean-Reset  
A Clean Reset clears all user-installed settings, applications and data from the device.  
- To perform a Clean-Reset, press and hold F1, F3 and the power buttons  
- While holding down these buttons, press the reset buttons for about two seconds  
- When the Pocket PC restarts release first the F1, F3 and power buttons first and  
then release the reset buttons  
- The Pocket PC resets and powers on  
 
System Overview  
2
15  
1
3
16  
25  
24  
17  
18  
19  
4
14  
23  
13  
12  
5
22  
11  
10  
6
9
8
21  
7
20  
back and inhousing components*  
Front and bottom panel components  
15 serial interface for connecting optional modules*  
16 SD card expansion slot*  
1
2
Flat top panel, optional long top panels for adding  
barcode or RFID modules available  
Wireless / Notification LED indicator  
Off = WiFi or Bluetooth are both off  
Blue flash = WiFi and / or Bluetooth are on  
Green flash = notification events have occured  
17 Typ II CF card slot*  
18 Stereo-headphone / headset jack (3,5mm)*  
19 IrDA Infrared port*  
20 Lower socket for optional handstraps  
or handgrips*  
3 Charge LED indicator  
Off = no charging  
Red flash = charging  
Red solid = charging complete  
21 Two stylus slots*  
22 Backcover label, including serial number  
and device name*  
4
Touchscreen  
5
6
7
Power button  
23 External socket for connecting external  
trigger additional to F5 button*  
F4 button (HP indication: iTask button)  
24 Upper sockets for optional handstraps or handgrips*  
25 Battery slot*  
F3 button (HP indication: Messaging button)  
Starting iPAQ Wireless, press and hold for two seconds  
8
9
5 pin charging plug with USB connector  
(only active with powered charger)  
Speaker and microphon in / outputs  
10 F2 button (HP indication: Contacts button)  
Starting HP Protect Tools, press and hold  
for two seconds  
11 F1 button (HP indication: Calendar button)  
Switching Landscape / Portrait mode,  
press and hold for two seconds  
i.roc 420  
with scannermodule  
and optional handgrip  
inserted in dockingstation  
12 5-Way Navigation button, scrolling through a list or  
pushing to select (similar to using a joystick)  
13 F5 button (HP indication: Record button)  
Using as trigger button for optional barcode or  
RFID modules  
14 2 Reset buttons, for Soft Reset press both  
buttons at the same time  
*not all i.roc x20 types provide full functionality in the way  
descriped before or are accessible by enduser  
 
Learning more about the i.roc x20 Pocket PC  
for information on ...  
Using your Pocket PC  
see this source ...  
- HP iPAQ hx2000 Pocket PC Family  
user guide on the related PC  
Companion CD  
- HP iPAQ hx2000 product side on  
- i.roc x20 Productside on  
Bluetooth- and WiFi connections  
HP iPAQ hx2000 Pocket PC Family  
user guide on the related HP  
Companion CD  
Additional programs that can be  
installed on your Pocket PC  
- HP Companion CD  
- i.roc x20 product side on  
- Use at application ”EcomEdit”  
- User guide for ”AutoInstall”  
Safety precations and  
Safety instructions  
Document ”Safety instructions“  
on i.roc x20 prouct side on  
Information about warranty  
CE Conformity  
Document ”Safety instructions“  
on i.roc x20 product side on  
Document ”CE Conformity“  
on i.roc x20 product side on  
Accessory  
Support  
On the i.roc x20 product side on  
Phone: +49(0) 62 94 / 42 24 - 0  
Technical data  
On the i.roc x20 product side on  
WEEE-Reg.-No. DE 934 99306  
3500 AL02 A01 01/09 Subject to change without notice!  
ecom instruments GmbH · Industriestr. 2 · 97959 Assamstadt · Germany  
Tel.: + 49 (0) 62 94 / 42 24 0 · Fax: + 49 (0) 62 94 / 42 24 90 · E-Mail: [email protected]  
 

Echo Blower PB 210E User Manual
Extron electronic Network Card BNCF BNCF 10 User Manual
Extron electronic Switch DMS 1600 User Manual
Faber Ventilation Hood 630006498 User Manual
Fender Guitar 12683 User Manual
Fender Music Mixer SR6300 User Manual
FMI Indoor Fireplace F48HIRA User Manual
Furuno Radar Detector FCV 1200BB User Manual
Garmin GPS Receiver Trail Manual User Manual
GE Dishwasher ZBD1870NSS User Manual