ADTRAN Network Router MX2810 M13 User Manual

M13 Multiplexer  
MX2810 M13 Multiplexer  
Product Features  
Backhaul consolidation of T1 remains an  
important function in network operations.  
With central office space at a premium,  
carriers need an M13 device that provides  
cost efficiency, compact size, and built-in  
detected, the MX2810 will not swap to the  
secondary board until it determines that the  
failure is hardware-oriented and not a line  
failure. This intelligent redundancy feature  
minimizes unnecessary hits to the line that  
other M13 units may allow.  
Affordable DS3 bandwidth  
consolidation  
Built-in 1:1 redundancy  
Hot-swappable controller  
cards and power  
supplies  
®
intelligent redundancy. ADTRAN has  
applied its industry-leading expertise in  
developing carrier class products to the  
Like all ADTRAN products, the MX2810  
offers comprehensive management options,  
including full management and GUI support  
SNMP and Telnet management  
TM  
MX2810 M13 multiplexer. The MX2810  
offers bandwidth consolidation at a low price  
and in the smallest footprint available in the  
industry. Measuring only 1U high in 19-inch  
or 23-inch rackmount configurations, this  
compact device gives ILECs a powerful tool  
for consolidating 28 T1 signals or 21 E1  
signals into a T3 circuit.  
TL1 alarming and provisioning  
support  
®
from ADTRANs Total Access EMS. It features  
a VT100 terminal interface for local configura-  
tion. To support SNMP and Telnet  
Backhaul multiple service  
types (T1/E1)  
management, the MX2810 has an integrated  
10Base-T Ethernet port. It has an RS-232 port  
for network management, as well as an  
RS-485 port for daisy chaining multiple units.  
TL1 alarming and provisioning are also  
supported.  
Smallest M13 form factor  
available  
Dual redundant load sharing  
DC power supplies  
The MX2810 houses two hot-swappable  
controller cards capable of combining inde-  
pendent T1s, E1s, or T1s and E1s on the same  
DS3. The two controller cards also provide  
built-in 1:1 redundancy for the DS1 and DS3  
signals, as well as built-in BERT (Bit Error  
Rate Testing) capabilities. When a T1 failure is  
M13 and C-Bit signaling  
support  
The MX2810 meets the most stringent  
NEBS Level 3 requirements. In addition, the  
product is backed by an industry-leading  
10-year warranty.  
Industry-standard CSU and  
NIU loopback codes  
NEBS Level 3 compliant  
Industry-leading, 10-year  
warranty  
 

Acer Flat Panel Television MB243WABNS User Manual
Addonics Technologies Computer Hardware RT5835HMEU User Manual
ADTRAN Network Router MX2810 M13 User Manual
Alamo Lawn Mower TX235 User Manual
Altec Lansing Portable Speaker PS 92 User Manual
Athena Technologies Portable Speaker 5 User Manual
Bahco Saw Multi Purpose Bandsaw Blades User Manual
BC Speakers Speaker 18P WB 46 User Manual
Beko Cordless Telephone BD 220 User Manual
Tripp Lite Surge Protector Protect It User Manual